Canon imageFORMULA ScanFront 300P ScanFront 300/300P Operation Guide - Page 59
Operating Procedures, Brightness, Double feed detection by Ultrasonic Only
View all Canon imageFORMULA ScanFront 300P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Brightness Adjust the brightness to match the density of the document. Hint When you want to scan both sides of a document that has front and back sides of different densities, you can change the settings for the brightness of the front side and back side separately in the detailed settings and then perform scanning. Detailed Settings Press the [Detailed settings] button to open the Detailed Settings screen. Double feed detection by Ultrasonic (Only Available with the ScanFront 300P) The scanner uses an ultrasonic sensor to detect when two or more documents are fed together, and stops feeding when a double feed is detected. IMPORTANT • This method is effective when documents overlap by 1.97" (50 mm) or more. It does not function if only a slight portion of the document is overlapping. • When using the ScanFront 300, the [Double feed detection by Ultrasonic] setting is set to [OFF]. • When [Scanning Side] is set to [Folio], [Double feed detection 3 by Ultrasonic] is grayed out and cannot be selected. Double feed detection by length The scanner detects by document length when two or more documents are fed together, and stops feeding when a double feed is detected. Operating Procedures IMPORTANT • Using the length of the first page of the document as a reference, the scanner determines a double feed when it detects a document with a length at least 1.38" (35 mm) longer or shorter than the reference length. • Set [Double feed detection by length] to [OFF] when scanning a document that contains pages of different lengths. Skip Blank Page When [Skip Blank Page] is selected in the scanning side settings, this setting is enabled, and you can adjust the sensitivity level for skipping blank pages. 3-29