Canon imageFORMULA ScanFront 330 ScanFront 300/300P Instructions - Page 134
Log Settings, Make Log File, PC Name Host Name, Location, User name/Password, Domain/Workgroup
View all Canon imageFORMULA ScanFront 330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
3. Click [Browse], and specify the update file to use. 4. Click [Version Up]. Chapter 6 Web Menu (Administrator Mode) ❏ Log Settings You can configure settings for log files. Hint • ScanFront Service is not used for log settings. • The log file is a text file in CSV format. You can view the information of the log file in an application that supports CSV format. 5. Confirm the message that appears, and click [OK] to perform the version update. IMPORTANT • It takes several minutes to transfer the update file to the scanner. Do not operate the Web Menu or scanner until the Web Menu changes to the following display. • Version update may take longer if a large quantity of setting information is set on the scanner. 6. Click [OK] to close the Web Menu. IMPORTANT When the update file finishes transferring, the version update starts. Do not operate the scanner until the version update is complete and the scanner restarts. 7. Configure the IP address, and then restore the backup file from the Web Menu. Make Log File Select this check box to create a log file. PC Name (Host Name) Enter the name of the computer containing the publicly shared folder where the log file will be saved. Location Enter the name of the shared folder. You can also press [Browse] to select a folder to save. User name/Password Enter the name and password of a user with the authority to write data to the shared folder. Domain/Workgroup If the computer containing the shared folder is part of a domain, enter the domain name. IMPORTANT If the computer containing the shared folder is part of a domain, enter the user name and password registered with the domain, and the domain name. File name Enter a name for the log file. 6-42