Canon imagePROGRAF PRO-2000 imagePROGRAF PRO-6000 / PRO-6000S / PRO-4000 / PRO - Page 1
Canon imagePROGRAF PRO-2000 Manual
View all Canon imagePROGRAF PRO-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Introductory Information Setup Guide ENGLISH Read this manual before attempting to operate the printer. Keep this manual in a handy location for future reference. • Instructions in this Setup Guide show the PRO-4000 printer. Note that your printer may look different from these illustrations in some cases. However, the basic Caution operations are the same. Before Setting Up the Printer In order to ensure that this product is used safely, be sure to read the precautions. -> Quick Guide (separate manual) Confirming the Installation Space It is recommended that you reserve space of the following dimensions to allow you to work around the printer. Check the completed image of the printer you purchased and make sure you have enough space to install the printer. • The printer stand and roll unit may be options depending on the model. Care is required because the required space may differ depending on whether or not the Important options are used. • The space required in front of the printer differs on how the basket supplied with the printer stand is used. This shows the installation space when used in the position in the illustration. PRO-2000 Installation space (W x D x H) • W hen not using the stand 59.5 x 56.5 x 40.2 inches (1510 x 1434 x 1020 mm) • W hen using the stand 59.5 x 66.3 x 61.5 inches (1510 x 1684 x 1560 mm) 5.9 inches (150 mm) PRO-4000 / PRO-4000S PRO-6000 / PRO-6000S Installation space (W x D x H) Installation space (W x D x H) 78.5 x 66.3 x 61.5 inches (1993 x 1684 x 1560 mm) 94.5 x 66.3 x 61.5 inches (2399 x 1684 x 1560 mm) 5.9 inches (150 mm) 5.9 inches (150 mm) 7.9 inches (200 mm) 23.6 inches (600 mm) (When not using the stand) 23.6 inches (600 mm) (When using the stand) 3.9 inches (100 mm) (When not using the stand) 7.9 inches (200 mm) 3.9 inches (100 mm) (When using the stand) 7.9 inches (200 mm) 23.6 inches (600 mm) 7.9 inches (200 mm) 3.9 inches (100 mm) 7.9 inches (200 mm) 23.6 inches (600 mm) 7.9 inches (200 mm) 3.9 inches (100 mm) Overview of Setup Set up the printer using the following procedure. * Assemble the Stand Install the Printer (P.3) * Refer to the separate manual (P.3) * Attach the Roll Unit * Attach the Basket Turn On the Printer (P.4) * Refer to the separate manual (P.4) * Refer to the separate manual (P.4) Install the Ink Tanks (P.6) If an error message appears during setup or other problems occur, refer to "Responding to Messages" on p.14. • Some items are included with the printer but not described in Note this manual. Keep these items in a safe place after setup because they are used in various printing applications. • For instructions on the included items not described in this manual, refer to the Online Manual. ("How to Display the Online Manuals" on p.14) • A cable to connect the printer to a computer is not provided with the printer. • Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. Install the Print Head (P.8) Load the Paper (P.9) • Perform Print Head Adjustment (P.10 ~ 12) • Connect to the Printer • Check this also after setup is complete. Store Accessories in the Pockets How to Display the Online Manuals (P.13) (P.14) QT6-2133-V01 XXXXXXXX © CANON INC. 2017 1 RMC (Regulatory Model Code): K10468 RMC (Regulatory Model Code): K10441 RMC (Regulatory Model Code): K10440 RMC (Regulatory Model Code): K10439 RMC (Regulatory Model Code): K10438 PRINTED IN XXXXXXXX 479