Canon imagePROGRAF TM-300 MFP Z36 imagePROGRAF TM-300 series User Manual - Page 528
Paper Size, Checking Print Status
View all Canon imagePROGRAF TM-300 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 528 highlights
6. Check Print Settings Set the number of copies to be printed and print options, as needed. 7. Tap Print The printer prints according to the specified settings. Note • It can take the Wi-Fi a few minutes to get connected after the printer turns on. Print after checking that the printer is connected to the network. • You cannot use AirPrint if Bonjour settings of printer are disabled. Check LAN settings of printer and enable Bonjour settings. • Refer to "Cannot Print Using AirPrint" for printing problems when using AirPrint. Paper Size With AirPrint, the paper size is selected automatically according to the application being used on the iOS device and the region in which AirPrint is used. Important • Depending on the device or OS, the initial settings of paper size may differ. Test printing is recommended. • Depending on the application you are using, the available paper size may differ. Checking Print Status You can check the print status of AirPrint from Print Center. Click the Home button in the iOS device twice to switch to multitask mode, swipe towards the right to display Print Center, then tap on it. 528