Canon imagePROGRAF TM-300 series User Manual - Page 296
Bonjour, Channel, Default Gateway, Default router address, DHCP server functionality, DHCPv6, DNS
View all Canon imagePROGRAF TM-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 296 highlights
B • Bonjour A service built into macOS operating system to detect the connectable devices on a network automatically. C • Channel Frequency channel for wireless communication. In the infrastructure mode, the channel is automatically adjusted to match that set to the wireless router. This printer supports channels 1 to 13. (Channels 12 and 13 are not supported depending on the country or region of purchase.) Note that the number of channels that can be used for your Wi-Fi varies depending on the region or country. D • Default Gateway A relay device to connect to another network such as a router or a computer. • Default router address A default IP address set for a router. • DHCP server functionality The router assigns an IP address automatically whenever the printer or the personal computer on a network starts up. • DHCPv6 A protocol to assign necessary information automatically when a computer connects to network. DHCPv6 can be used when IPv6 is enabled. • DNS server A server that converts device names into IP addresses. When specifying IP addresses manually, specify the addresses of both a primary and a secondary server. E • Easy wireless connect (Cableless setup) Specifies a wireless router settings using a device (e.g. smartphone) directly without using a wireless router. 296