Canon imagePROGRAF TM-300 TM-305 / TM-300 / TM-205 / TM-200 Setup Guide - Page 10
When the paper feed is finished, the, charging the ink for the first time and adjusting
View all Canon imagePROGRAF TM-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
7 When the paper feed is finished, the printer automatically starts charging the ink for the first time and adjusting the print head. This takes about 25 minutes. During this time, install the software on the computer. (Refer to "Connecting to the Printer" on p.12) Note • Charging the system with ink fills the system from the ink tanks to the print head. In addition, cleaning is performed to keep the printer in optimal condition. This may cause the remaining ink indicator and maintenance cartridge capacity indicator to drop some amount. Starter ink tanks are for first-time installation. It is recommended that you purchase replacement ink tanks quickly. 8 When the print head adjustment is complete, the paper with the adjustment pattern printed on it is ejected. Instructions on how to remove paper will be displayed on the touch screen. Perform the rest of the procedure by following the instructions. Important • Do not operate the release lever until the instruction on removing paper is displayed on the touch screen. If you operate the release lever while printing is in progress, the printing will stop in the middle. 10