Canon imagePROGRAF iPF6300 iPF6300 User Manual ver.1.20 - Page 1010

Error Message > Messages regarding printing or adjustment > Messages regarding printing or adjustment Cannot execute this command. Use other paper 992 Cannot print as specified...992 Cannot calibrate...992 Excessive temperature or humidity...993 Before borderless printing, move the blue platen switch 993 Blue platen switch is dirty...993 Move the blue platen switch No.xx to the right. (xx represents a number 993 Cannot adjust paper feed...994 Check printed document...994 Cannot execute this command. Use other paper. Cause Paper compatible with color calibration is not loaded. Corrective Action 1. Press the OK button to clear the error. 2. Load paper that is compatible with color calibration. See the Paper Reference Guide. (See "Types of Paper.") →P.712 Always make sure the loaded paper matches the type of paper in the printer paper settings. Adjustment cannot be completed correctly unless the loaded paper matches the settings. Cannot print as specified. Cause Corrective Action 12 The loaded paper is too small. (When you have attempted to print a test Replace the paper with paper of A4/Letter (vertical) size or larger as follows. print sheet or other printer status information.) 1. Press ▲ or ▼ to select Change Paper, press the OK button, and remove the paper. (See "Removing Sheets.") →P.755 2. Switch to paper A4/Letter (vertical) or larger. (See "Loading and Printing on Sheets.") →P.6 The printer will resume printing. Press ▲ or ▼ to select Stop Printing, and then press the OK button. 992 Cannot calibrate. Cause The paper for printing a test pattern is soiled. Otherwise, you have loaded colored paper. The test pattern was printed too faintly. Corrective Action Press the OK button to clear the error. Load unused paper compatible with color calibration. (See "Types of Paper.") →P.712 Press the OK button to clear the error. Cannot execute this command. Use other paper. iPF6300