Canon imagePROGRAF iPF650 iPF650 655 750 755 Setup-Guide - Page 2

Preparations Prepare the printer for use by installing the printer and connecting the power cord. 1 Install the printer. You can use the following two methods for installing the printer. • Install with a stand Assemble the stand and install the printer referring to the Printer Stand Setup Guide included with the stand. After installation, proceed to step 4. • Install without a stand on a table Proceed to step 2. • Stands may be standard or optional MEMO depending upon your model and location. iPF750/iPF755: Standard iPF650/iPF655: Optional (equipped as standard in some locations) 2 Remove the packing materials from the top of the printer. 3 Three people should hold the printer's carrying handles and place the printer on a table or other flat location. • The iPF750/iPF755 weighs approximately Caution 52 kg and the iPF650/iPF655 approximately 43 kg by themselves. Moving the printer requires at least three people. Be careful to avoid back strain and other injuries. • When moving the printer, firmly grasp the carrying handles. Holding the printer at other positions is dangerous, and may cause injury and damage if the printer is dropped. 4 Remove the orange tape used to secure the roll holder to the printer. 5 Move the printer to the location where you will use it. • When moving the stand, lift the support rod Caution to the position (a) before closing the output stacker and unlocking the 4 casters. Failure to do so may lead to scratched flooring, damage to the basket cloth, and injury. • After you have moved the stand, be sure to lock the 4 casters. a 6 Plug the power cord into the power supply connector on the right of the printer and plug the other end into the outlet. OFF ON 2