Canon imagePROGRAF iPF655 iPF655 User Manual Ver.1.30 - Page 858
Banding in different colors occurs, Colors in printed images are uneven, Adj. Pri, ority, Print Length
View all Canon imagePROGRAF iPF655 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 858 highlights
Troubleshooting > Problems with the printing quality > Cause Color may change slightly even on the same model of printer if you use a different version of the firmware or printer driver, or when you print under different settings or in a different printing environment. Corrective Action Follow these steps to prepare the printing environment. 1. Use the same version of firmware or printer driver. 2. Specify the same value for all settings items. Banding in different colors occurs Cause Corrective Action The paper feed amount is out of adjustment. Adjust the feed amount. (See "Adjusting the Feed Amount.") →P.673 Printing does not proceed smoothly because print jobs are interrupted during transmission. Exit other applications and cancel other print jobs. In the Control Panel menu, Adj. Priority is set to Print Length. Setting Adj. Priority to Print Quality in the Control Panel menu and adjusting the feed amount may improve results. (See "Adjusting the Feed Amount.") →P.673 The Printhead is out of alignment. Adjust the Printhead alignment. (See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).") →P.665 The Printhead nozzles are clogged. Print a test pattern to check the nozzles and see if they are clogged. (See "Checking for Nozzle Clogging.") →P.795 Streaks may occur if you set the Print Quality too low. Choose a higher level of Print Quality in the Advanced Settings of the printer driver and try printing again. Printing in Draft or Standard mode is faster and consumes less ink than in Highest or High modes, but the printing quality is lower. (See "Giving Priority to Particular Graphic Elements and Colors for Printing.") →P.54 The type of paper specified in the Load paper of the same type as you have specified in the printer driver. 12 printer driver does not match the type (See "Loading Rolls in the Printer.") →P.630 loaded in the printer. (See "Loading Sheets in the Printer.") →P.652 Make sure the same type of paper is specified in the printer driver as you have loaded in the printer. 1. Press the Stop button and stop printing. 2. Change the type of paper in the printer driver and try printing again. 842 Colors in printed images are uneven Cause Line Drawing/Text is selected when printing images in many solid colors. Corrective Action In Print Priority in the Advanced Settings of the printer driver, choose Image. Banding in different colors occurs iPF655