Canon imagePROGRAF iPF685 User Guide - Page 640

An error message is shown on the Display Screen iPF685 The printer stops during a print job An error message is shown on the Display Screen 640 The printer ejects blank, unprinted paper ...640 The printer stops when printing a HP-GL/2 job (the carriage stops moving 652 An error message is shown on the Display Screen Cause The last portion of roll paper was used during a print job, and paper could not be advanced because the trailing edge is taped to the roll. Corrective Action Remove the used roll and insert a new roll. (See "Removing the Roll from the Printer.") ➔P.380 (See "Removing the Roll Holder from Rolls.") ➔P.383 (See "Loading and Printing on Rolls.") ➔P.19 The printer ejects blank, unprinted paper Cause The leading edge of the roll paper was cut to straighten it. Corrective Action The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a value other than Off in the Control Panel menu. (See "Cutting the Leading Edge of Roll Paper Automatically.") ➔P.391 The Printhead nozzles are clogged. Print a test pattern to check the nozzles and make sure the Printhead is in good condition for printing. (See "Checking for Nozzle Clogging.") ➔P.599 A print job was received from an incompatible printer driver. Use the correct imagePROGRAF printer driver for the printer and try printing again. The printer has received print data that includes HP RTL commands when Auto Rotate is On in the Control Panel menu. In the Control Panel, set Auto Rotate to Off and print again. (See "Menu Settings.") ➔P.459 The printer is damaged. Contact your Canon dealer for assistance. Troubleshooting The printer stops during a print job 640 User's Guide