Canon imagePROGRAF iPF765 MFP iPF765 Basic Guide - Page 111
The paper is too small., Replace paper with A4/LTR vertical or larger
View all Canon imagePROGRAF iPF765 MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
iPF765 The paper is too small. Cause When Detect Mismatch in the Control Panel menu is set to Pause or Hold Job, paper smaller than the size specified in the printer driver is loaded. Corrective Action However, note that this error may cause paper jams and affect the printing quality. Adjust the paper size setting in the printer driver to match the size loaded in the printer as follows. 1. Press ▲ or ▼ to select Stop Printing, and then press the OK button. 2. Change the paper size setting in the printer driver to the size loaded in the printer and try printing again. Replace the loaded paper with paper of a size that matches the size setting in the printer driver as follows. 1. Press ▲ or ▼ to select Change Paper, and then press the OK button to stop printing. 2. Replace the loaded paper to match the paper width setting in the printer driver and try printing again. When Detect Mismatch in the Control Panel menu is set to Warning, paper smaller than the size specified in the printer driver is loaded. You can continue to print, but note that this error may cause problems in the printing results. The paper is too small. "Replace paper with A4/LTR (vertical) or larger" Cause Corrective Action The loaded paper is too small. Replace the paper with paper of A4/Letter (vertical) size or larger as follows. 1. Press ▲ or ▼ to select Change Paper, press the OK button, and remove the paper. (See "Removing Sheets.") →P.20 2. Switch to paper A4/Letter (vertical) or larger. (See "unknown.") →User's Guide The printer will resume printing. Press ▲ or ▼ to select Stop Printing, and then press the OK button. "Replace roll with 10 in. wide or larger roll." Cause Corrective Action The loaded paper is too small. Replace the roll with a roll 10 inches in width or larger as follows. 1. Press ▲ or ▼ to select Change Paper, and then press the OK button. (See "Removing the Roll from the Printer.") →P.15 (See "Removing the Roll Holder from Rolls.") →User's Guide 2. Replace the roll with a roll 10 inches wide or larger. (See "Attaching the Roll Holder to Rolls.") →P.9 (See "Loading Rolls in the Printer.") →P.12 The printer will resume printing. Press ▲ or ▼ to select Stop Printing, and then press the OK button. Error Message Messages regarding paper 111 Basic Guide