Canon imagePROGRAF iPF780 Basics Guide - Page 128
Other Messages, GARO Wxxxx (x represents a number), ERROR Exxx-xxxx (x represents a letter or number)
View all Canon imagePROGRAF iPF780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
GARO Wxxxx (x represents a number) iPF780 Series Other Messages GARO Wxxxx (x represents a number) ...128 ERROR Exxx-xxxx (x represents a letter or number 128 Hardware error. xxxxxxxx-xxxx (x represents a letter or number 128 Top cover is open...129 Prepare for parts replacement...129 Parts replacement time has passed...129 Unknown file...129 Multi-sensor error ...129 Error in cutter position...129 GARO Wxxxx (x represents a number) Cause Corrective Action There is a problem with the print job. Try printing again, using the correct printer driver. It is also possible to continue printing in this state. However, you may not be able to obtain the desired printing results. ERROR Exxx-xxxx (x represents a letter or number) Cause An error requiring service may have occurred. Corrective Action Write down the error code and message, turn off the printer, and contact your Canon dealer for assistance. Error Message Other Messages Hardware error. xxxxxxxx-xxxx (x represents a letter or number) Cause The last portion of roll paper was used during a print job. The paper was not advanced because the trailing edge is taped to the roll. Corrective Action Turn off the printer and remove the roll from the printer before restoring power. Fastening tape or the Belt Stopper has not been removed inside the Turn off the printer, open the Top Cover and remove the Top Cover. tape or the Belt Stopper before restoring power. An error requiring service may have occurred. Turn off the printer and wait at least three seconds before restoring the power. If the message is displayed again, write down the error code and message, turn off the printer, and contact your Canon dealer for assistance. 128 Basic Guide