Canon imagePROGRAF iPF825 iPF825 User Manual Ver.1.00 - Page 908

Error Message > Messages regarding paper > This paper cannot be used. Cause Paper that is too large for the printer has been loaded. Paper that is too small for the printer has been loaded. Paper has been loaded that is too small to print the test pattern for printhead adjustment or nozzle checking. Corrective Action Lift the Release Lever and load paper of the correct size. (See "Paper Sizes.") →P.626 Lift the Release Lever and load paper of the correct size. (See "Paper Sizes.") →P.626 Lift the Release Lever and load unused paper A4 or larger. More than one sheet may be required depending on the adjustment. Cannot print as selected. Another roll is in use. Cause A printed document remains in the Output Tray without being cut and a print job was received that specifies the other roll. Corrective Action Follow these steps to load the other roll after cutting the printed document. 1. Hold down the Stop button for a second or more to cancel printing. 2. Cut the printed document. (See "Specifying the Cutting Method for Rolls.") →P.654 3. Load the other roll and resend the print job. (See "Loading and Printing on Rolls.") →P.3 Roll printing is selected. Cause Corrective Action You have attempted to print a test print sheet or other printer Load a roll and try printing again. status information on a roll, but no roll is loaded. To print on a sheet instead, hold down the Stop button for more than a second to cancel printing, load a sheet, and then print. 13 (See "Loading and Printing on Sheets.") →P.8 Roll printing is selected, but sheets are loaded. Cause Corrective Action A print job for rolls was received when a sheet is Follow these steps to load and print on a roll. 892 loaded. 1. Press the OK button and remove the sheet. (See "Removing Sheets.") →P.669 2. Load a new roll. (See "Loading Rolls in the Printer.") →P.634 The printer now starts printing the print job. Hold down the Stop button for a second or more to cancel printing. This paper cannot be used. iPF825