Canon imagePROGRAF iPF830 MFP M40 Setup Guide
Canon imagePROGRAF iPF830 MFP M40 Manual
 |
View all Canon imagePROGRAF iPF830 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon imagePROGRAF iPF830 MFP M40 manual content summary:
- Canon imagePROGRAF iPF830 MFP M40 | Setup Guide - Page 1
unit support) • BU-03 Wheeled output stacker • Printer Stand (Roll unit support) • instructions on the included items not described in this manual, refer to the User's Guide. • A cable to connect the printer to a computer is not provided with the printer. • Canon, the Canon logo, and imagePROGRAF - Canon imagePROGRAF iPF830 MFP M40 | Setup Guide - Page 2
attachment #2 j. Ejection support (x4) (*3) purchased the iPF850 Series, Guide, refer to the manuals for instructions on operation and maintenance. Printed Manuals Quick Guide The Quick Guide Troubleshooting tips and Error messages • Preparations for transferring the printer User's Guide This guide - Canon imagePROGRAF iPF830 MFP M40 | Setup Guide - Page 3
Refer to "Install the Roll Unit" in the Printer Stand Setup Guide Install the Printer 1 Remove the packaging material on top of the printer, the printer may become damaged. a • When standing up the printer or supporting the printer, hold the metal parts of the printer. If you hold a plastic - Canon imagePROGRAF iPF830 MFP M40 | Setup Guide - Page 4
6 Align the triangles on the back of the printer and Stand when setting the printer on the Stand. Secure the printer and Stand firmly together using four M4 hex screws on each side by the Allen Wrench. 7 Push in the roll unit. 8 Use the Roll Unit Cable to connect the port on the back of the roll - Canon imagePROGRAF iPF830 MFP M40 | Setup Guide - Page 5
automatically takes up printed roll paper. -> Refer to the Media Take-up Unit Setup Guide included with the media take-up unit Set Up the Output Stacker Attach the wheeled output stacker or the stacker) 4 Lift the Ejection Guide. 5 Attach the four Ejection Supports (a) on the back of the Ejection - Canon imagePROGRAF iPF830 MFP M40 | Setup Guide - Page 6
(when using the stationary output stacker or the stacker) 6 Lower the Ejection Guide. 7 Close the Top Cover. 8 Plug the power cord into the Power Supply Connector on the back of the printer. 9 Plug the power cord into the outlet. - Canon imagePROGRAF iPF830 MFP M40 | Setup Guide - Page 7
zone and press OK. Time Zone 1/5 0:London (GMT) +1:Paris,Rome +2:Athens,Cairo +3:Moscow +4:Eerevan,Baku 4 Instructions on ink tank installation are shown on the display screen. Open the ink tank covers as instructed. 5 Raise the stopper (a) of the ink tank lock lever for the color you are - Canon imagePROGRAF iPF830 MFP M40 | Setup Guide - Page 8
10 Make sure the ink lamp lights red. 11 Check that the ink lamp is alight, and then push the ink tank more strongly until it touches the base. 12 Repeat steps 5 to 11 to mount each of the Ink Tanks. Close the ink tank covers. • If the ink lamp does not light, repeat steps 5 and 9. M BK R G B - Canon imagePROGRAF iPF830 MFP M40 | Setup Guide - Page 9
printhead fixer cover (a) to open it fully. At this time, make sure that no debris becomes adhere to the contacts (b) on the carriage. a Instructions are now shown on the display screen regarding printhead installation. b 4 Hold the printhead by the grips (a) as you remove it from the pouch - Canon imagePROGRAF iPF830 MFP M40 | Setup Guide - Page 10
press the Load key and select roll paper as the paper source. For details, refer to the User's Guide and Basic Guide that can be accessed by the procedure in "How to Display the Electronic Manuals" (P. 18). • You can also see the method for loading roll paper using the control MEMO panel navigation - Canon imagePROGRAF iPF830 MFP M40 | Setup Guide - Page 11
support contact center. Windows You can print from Windows via USB or TCP/IP (network) connections. The installation procedure varies depending on how your printer is connected. Install the software by following instructions Service Guide that is contained on the CD-ROM by clicking View Basic Guide - Canon imagePROGRAF iPF830 MFP M40 | Setup Guide - Page 12
6 If you can agree Extended Survey Program, click Agree. 7 If you can respond to the questionnaire, click Next. 8 Confirm your questionnaire responses, and click Next. 9 In the Printer Selection window, select The printer is connected directly to a computer and click Next. 10 In the Printer - Canon imagePROGRAF iPF830 MFP M40 | Setup Guide - Page 13
in the Getting Ready window, select Find available printers in the network and click Next. Proceed to step 6. When entering the printer's IP address manually After reading the precautions in the Getting Ready window, select Specify the IP address of available printers in the network and click Next - Canon imagePROGRAF iPF830 MFP M40 | Setup Guide - Page 14
IP Address Specifications window appears, follow the instructions of "When entering the printer's IP address manually" in step 8 to 11 on page "Configuring the Printer's TCP/ IP Network Settings With RemoteUI" in the user guide for details. 1 Perform steps 1 to 3 of the procedure in "When the - Canon imagePROGRAF iPF830 MFP M40 | Setup Guide - Page 15
Mac OS You can print from Mac OS via USB or network connections such as Bonjour or IP. Install the software depending on your computer environment. OS X v10.6.8 to v10.9 Install the software • If you install the software, log onto the computer as an administrator. 1 - Canon imagePROGRAF iPF830 MFP M40 | Setup Guide - Page 16
Select the printer 13 Select the method of connecting to the printer, and click Next. For USB connection, the printer is automatically added and you should proceed to step 17. 14 Click Add Printer. 15 Select the printer to add from Default and click Add. 16 Click Next. 19 Click Exit. • You can - Canon imagePROGRAF iPF830 MFP M40 | Setup Guide - Page 17
the stacker for collecting paper ejected by printing to roll paper. -> Refer to the Stacker Setup Guide included with the stacker Store Accessories in the Pockets 1 Use the manual pocket to store the manual so you can refer to it as needed. 2 Store accessories such as the 3-inch paper core - Canon imagePROGRAF iPF830 MFP M40 | Setup Guide - Page 18
dialog box that has the name of the printer in the title. 6 Select the Support sheet and click the User Manual button. 7 To display the user guide, click User's Guide. To display the Paper Reference Guide, click Paper Reference Guide. On Mac OS This section describes how to view the User - Canon imagePROGRAF iPF830 MFP M40 | Setup Guide - Page 19
Click Utility. 5 Click Open Printer Utility. 6 Click Support. 7 Click the User Manual button. 8 To display the user guide, click User's Guide. To display the Paper Reference Guide, click Paper Reference Guide. Viewing the Basic Guide The Basic Guide is stored on the User Software CD-ROM that is - Canon imagePROGRAF iPF830 MFP M40 | Setup Guide - Page 20
installation. If so, it may not indicate a problem with the printer, and the issue may be easily messages, refer to the User's Guide or Basic Guide. (See "How to Display the Electronic Manuals" on P.18) Message No and contact your Canon dealer for assistance. Write down the error code and message,
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
Introductory Information
ENG
Setup Guide
Series
Series
Series
±
QT5-74±9-V±
PRINTED IN CHINA
©CANON INC. 20±5
*
Q
T
5
7
4
1
9
V
1
*
Caution
Instructions in this Setup Guide show the iPF840 printer. Note that your printer may look different from these illustrations in some cases.
However, the basic operations are the same.
•
The markers used in this setup guide are
for the iPF830 series,
for the iPF840 series, and
for the iPF850
series.
•
150mm
100mm
600mm
200mm
200mm
150mm
100mm
600mm
200mm
200mm
1500mm
600mm
900mm(*)
258mm
150mm
200mm
200mm
100mm
• If you are using the optional wheeled
output stacker, you should reserve space
of the same dimensions as the iPF840.
• Reserve space that does not have any steps so that there
are no obstacles to moving the Stacker.
Assemble the Stand
*
(P.3)
(P.3)
Install the Printer
(P.3)
Attach the Media Take-up Unit
(P.5)
Set Up the Output Stacker
(P.5)
Prepare to Turn the Power On
(P.5)
Install the Ink Tanks
(P.7)
Install the Printhead
(P.9)
Load Paper to Adjust the Printhead
(P.10)
Install the Software
(P.11)
Store Accessories in the Pockets
(P.17)
How to Display the Electronic
Manuals
(P.18)
*
*
*
Attach the Stacker
(P.17)
*
Install the Roll Unit
Details for each step are given in this Setup Guide. Simply follow the instructions to
install the printer.
If an error message is displayed during setup or other problems occur, refer to
"Responding to Messages" on page 20.
Introduction
Read this manual before attempting to operate the printer.
Keep this manual in a handy location for future reference.
MEMO
Some items are included with the printer but not described in this manual.
Keep these items in a safe place after setup because they are used in
various printing applications.
•
For instructions on the included items not described in this manual, refer to
the User's Guide.
•
A cable to connect the printer to a computer is not provided with the printer.
•
• Canon, the Canon logo, and imagePROGRAF are trademarks or registered trademarks of CANON
INC.
• Microsoft is a registered trademark of Microsoft Corporation.
• Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other
countries.
• Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or
other countries.
• Mac, Mac OS, OS X and Bonjour are trademarks of Apple Inc., registered in the U.S. and other
countries.
• All other trademarks or registered trademarks described in this Setup Guide are the property of
their respective owners.
Even if you do not use the printer driver, be sure to install
Media
Configuration Tool
from the provided User Software CD-ROM. With
Media
Configuration Tool
, the paper types that are available in your area can be
registered to the printer. For instructions on installation, refer to "Install the
Software" on page ±±. (In Windows, select
Install Individual Software
in
the
Setup Menu
window to install
Media Configuration Tool
only.)
•
Before setting up the printer, check the completed image of the printer you purchased and make sure you have enough space to set up the printer. It is
recommended that you reserve space of the following dimensions to allow you to work around the printer.
Overview of Setup
Before Setting Up the Printer
Installation space
2293 × ±675 × ±5±8
(W x D x H mm)
Installation space
2293 × ±99± × ±5±8
(W x D x H mm)
Installation space
2293 × 30±7 × ±5±8
(W x D x H mm)
* This is the space that is required for
working between the stacker and
printer such as when replacing paper
or using the output stacker.
Set up the printer using the following procedure.
Only perform the steps for which the name of the model you purchased is
specified on the right of the printer.
* Refer also to the Setup Guide for the accessories and options in the following
table.
-List of accessories and options
• Printer Stand
• BU-03 Wheeled output
stacker (Option)
• TU-06 Media take-up unit
(Option)
• Printer Stand
(Roll unit support)
• BU-03 Wheeled output
stacker
• Printer Stand
(Roll unit support)
• RS-0± Stacker