Canon imagePROGRAF iPF830 MFP M40 Setup Guide - Page 13
Method of Configuring IP Addresses
View all Canon imagePROGRAF iPF830 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
4 In the Printer Selection window, select The printer is connected to computers in a network and click Next. 5 When searching the available printer on the network After reading the precautions in the Getting Ready window, select Find available printers in the network and click Next. Proceed to step 6. When entering the printer's IP address manually After reading the precautions in the Getting Ready window, select Specify the IP address of available printers in the network and click Next. Proceed to step 8. 6 When searching the available printer on the network Available printers are listed in the Search Results window. Select a printer from the list on either their IPv4 Devices or IPv6 Devices • The IPv6 Devices tab is not displayed in Windows XP, Windows tabs and click Next. MEMO Server 2003 R2, and Windows Server 2003. • If the printer you want to use is not displayed in the list on the IPv6 Devices tab, connect via IPv4 instead. • If the printer you want to use is not displayed in the list of printers on the IPv4 Devices tab, refer to "When the printer cannot be found on the network" on page 14 to setup and configure an IP address for the printer. The following step differs depending on the IP Address Status of the selected printer. In the case of Not Set or IP Address Overlap, proceed to step 7. In the case of Available, the installation begins. Proceed to step 9. 7 When searching the available printer on the network In the Method of Configuring IP Addresses window, select the method of configuring the IP address as suitable for your system. • To configure by directly entering the IP address Select Configure manually in Method of Configuring IP Addresses and enter the IP address. • To have the IP addresses allocated automatically using the DHCP server function Select Configure automatically. Note that other settings outside of the procedure are also required. ("Using DHCP", P.14) Once you have selected the method for configuring IP addresses, enter your preferred name for the printer in Device Name and the installation location in Printer Location under Information About Printer to Configure, and click Install to begin the installation. Proceed to step 9. 8 When entering the printer's IP address manually In the IP Address Specification window, select either IPv4 Address or IPv6 Address to enter the printer's IP address • Ask your network administrator for the IP address, as needed. and click Install. The installation process begins. • The IPv6 Devices tab is not displayed MEMO in Windows XP, Windows Server 2003 R2, and Windows Server 2003. 9 After reviewing the installation results in the Complete Installation window, click Next. 10 In the Finish window, select Restart my computer now and click Restart. 11 When you restart the computer, the software settings are enabled. The software installation is now completed. 13