Canon imagePROGRAF iPF8300S iPF8300S Basic Guide No.3 - Page 3

Remove paper 1 Remove the paper. Rolls: (→ , Removing the Roll from the Printer) Sheets: (→ , Removing Sheets) Access the Prep.MovePrinter menu 1 On the Tab Selection screen of the Control Panel, press ◄ or ► to select the Settings/Adj. tab ( ). Preparing to Transfer the Printer Ready OK:Setting/Adj. Menu Maint.C Remain.: 80% Tot.Print Area(m2): 678 • If the Tab Selection screen is not displayed, press the Menu button. 2 Press the OK button. The Set./Adj. Menu is displayed. 3 Press ▲ or ▼ to select Prep.MovePrinter, and then press the OK button. 4 Press ▲ or ▼ to select the level of transfer, and then press the OK button. 5 Press ▲ or ▼ to select Execute, and then press the OK button to display the confirmation screen. 6 Press ▲ or ▼ to select Yes, and then press the OK button. The printer is now prepared for transfer. • Level 1 Once preparations are finished, a message on the Display Screen requests you to turn off the printer. Turn off and pack the printer. There is no need to remove the ink tanks. • Level 2 and Level 3 Once preparations are finished, a message on the Display Screen requests you to open the Ink Tank Cover. Remove the ink tanks before packing the printer. • If consumables must be replaced, the message Consumables must be replaced. Call for service. is shown on the Display Screen and preparation is not possible. If this message is displayed, press the OK button and contact your Canon dealer for assistance. 3