Canon imageRUNNER 1435i Notification of New and Enhanced Functions - imageRUNN - Page 6
Setting a Remote UI PIN
View all Canon imageRUNNER 1435i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Setting a Remote UI PIN You can set a PIN for access to the Remote UI. All users use a common PIN. NOTE When Department ID Management is enabled, setting here is not required. For more information, see "Setting the Department ID Management" in the e-Manual. 1. Start the Remote UI and log on in System Manager Mode. (See "Starting the Remote UI" in the e-Manual.) 2. Click [Settings/Registration]. 3. Click [Security Settings] [Remote UI Settings]. 4. Click [Edit]. 5. Select the [Use Remote UI Access PIN] check box and set the PIN. [Use Remote UI Access PIN] If you select this check box, you must enter a PIN to access the Remote UI. [Set/Change PIN] To set a PIN, select the check box and enter a number of up to seven digits both in the [PIN] and [Confirm] text boxes. 6. Click [OK]. NOTE If PIN is forgotten: Set a new Remote UI Access PIN in the settings menu on the operation panel. Perform the following operation on the machine: Press Enter PIN Enter PIN (Confirm) . If Remote UI settings are initialized: The Remote UI Access PIN is also initialized. After an initialization, reset the PIN. (See "Initializing Menu" in the e-Manual.) Setting a Remote UI PIN 5