Canon imageRUNNER ADVANCE 6275 imageRUNNER ADVANCE 6200 Srs Basic Operation Gu - Page 65

Routine Maintenance • When loading paper into the paper drawer for the first time, set the paper size dial to match the paper size being loaded. (See "Adjusting a Paper Drawer to Hold a Different Paper Size," on p. 66.) • Paper Drawer (Right/Left) hold approximately 1,500 sheets of paper (20 lb bond (80 g/m2)) or 1,700 sheets of paper (17 lb bond (64 g/m2)). • The number of sheets that can be loaded in the Paper Drawer 3 and 4 is 550 sheets of paper (20 lb bond (80 g/m2)) or 680 sheets of paper (17 lb bond (64 g/m2)). • If there are instructions on the paper package about which side of the paper to load, follow those instructions. • When the paper is loaded into the paper drawer, the side facing down is the one printed on. • If problems, such as poor print quality or paper jams occur, try turning the paper stack over and reloading it. • For more information on the print direction of preprinted paper (paper which has logos or patterns already printed on it), see e-Manual > Copy. • Rewrap any remaining paper in its original package, and store it in a dry place, away from direct sunlight. • If paper runs out and printing is stopped, load a new paper stack. Printing restarts after the new paper stack is loaded. • If you print on the paper which has absorbed moisture, steam may come out from the output area of the machine. This is because the moist on the paper evaporates when the high temperature is applied when a toner is fixed to the paper. It is not a malfunction. (This especially happens in low room temperature.) 65