Canon imageRUNNER ADVANCE 6275 imageRUNNER ADVANCE 6200 Srs Setup Guide - Page 64
Set <Use Scan/Print Function> and <Use Print, Press [Use Scan/Print Function].
View all Canon imageRUNNER ADVANCE 6275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
7 Press [Close]. The USB setting is set. Next, follow the steps below to enable the scan/print functions. 8 Press [Function Settings]. 11 Press [Use Scan/Print Function]. 2 9 Press [Store/Access Files]. 12 Set and to 'On' ˠ press [OK]. Starting to Use the Various Functions of the Machine 10 Press [Memory Media Settings]. 13 Press [Close]. 14 Turn OFF the main power of the machine, and then turn ON the main power again. The [Use MEAP Driver for External USB Device], , and settings become effective only after turning the machine's main power OFF, and then ON. Scanning an Original You can store data scanned with the machine in a storage location. This section describes the procedure for storing data in the Advanced Box of another imageRUNNER ADVANCE series machine on the network. 1 Place your original on the machine. 64