Canon imageRUNNER ADVANCE C5250 imageRUNNER ADVANCE C5200 Srs Setup Guide - Page 18
Press [On], Press [IP Address Settings]., Specify the following settings, press [OK]., Press [DHCP
View all Canon imageRUNNER ADVANCE C5250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Operations Required to Use the Machine 7 Press [On] ˠ [OK]. 1 8 Press [IP Address Settings]. 10 Press [DHCP Option Settings]. 11 Specify the following settings ˠ press [OK]. In this example, the following settings are specified. : [On] : [Off ] 9 Specify the following settings ˠ press [OK]. In this example, the following values are entered: [IP Address]: 192.168.1.21 [Subnet Mask]: 255.255.255.0 [Gateway Address]: 192.1.254.0 The IP address settings are now specified. Next, specify the DNS settings. 12 Press [DNS Settings]. If you set [DHCP] to 'On' in [IP Address Settings], specify the DHCP option settings. If you set [DHCP] to 'Off', proceed to step 12. 18
18
Operations Required to Use the Machine
1
7
Press [On]
→
[OK].
8
Press [IP Address Settings].
9
Specify the following settings
→
press [OK].
In this example, the following values are entered:
[IP Address]: 192.168.1.21
[Subnet Mask]: 255.255.255.0
[Gateway Address]: 192.1.254.0
If you set [DHCP] to ‘On’ in [IP Address Settings], specify the DHCP
option settings. If you set [DHCP] to ‘Off’, proceed to step 12.
10
Press [DHCP Option Settings].
11
Specify the following settings
→
press [OK].
In this example, the following settings are specified.
<Acquire Host Name>: [On]
<DNS Dynamic Update>: [Off ]
The IP address settings are now specified.
Next, specify the DNS settings.
12
Press [DNS Settings].