Carson MP-400 User Manual - Page 2

USING ADAPTER CLIP Important: Before inserting smartphone into adapter clip, determine primary camera on phone. Typically, the primary is a 1x wide-angle camera and the other camera(s) are secondary. For latest instructions, and for selecting primary camera for iPhone 13 Pro and later, visit carson.com/multicam 1. Squeeze to open smartphone adapter clip and slide phone camera side down between adapter arms. 2. Align primary camera lens and center within the circular space of adapter clip. 3. Attach bottom side of adapter clip to top of microscope. It will click into place. 4. Turn on camera and follow steps for "Using Microscope." 5. Pinch screen to enlarge image. Take photos and videos to share with family and friends. 5 Top Bottom Attach the adapter clip to the top of the microscope as shown and turn on camera. Refer to for procedures of using the microscope. centered or is not a complete ro c centered over camera. Align the camera of the phone to the center of the circular hole of the adapter clip. Note: If viewing image is not centered or is not a complete round image, adjust adapter clip to make sure it is centered over camera. Always hold the phone securely during use. you release the phone while it is attached to the microscope it can and damage the phone. To maximize your image, pinch screen to enlarge. For best results, use in video mode. 7 Customer Service: If you experience any difficulties, please contact us and we will be happy to help you. [email protected] [email protected] [email protected] For warranty information, visit www.carson.com/warranty www.carson.com Carson Optical 2070 5th Avenue, Ronkonkoma, NY 11779 | Tel: 631-963-5000