Carson TR-100 User Manual - Page 3

USING TRIPOD: 1. To adjust center column height, twist locking ring counterclockwise to unlock. Raise center column as needed. Tighten locking ring to secure (Fig. 9). Center Column Locking Ring Fig. 9 2. To tilt panhead up or down, twist tilt/pan handle counterclockwise to loosen. Raise or lower tilt/pan handle to desired angle. Tighten handle to lock in place (Fig. 10). Note: To keep level, raise or lower Tilt/Pan Handle until the bubble inside the bubble level is in middle of tube. Fig. 10 Tilt/Pan Handle Bubble Level 3. To adjust pan angle, loosen pan locking knob by turning counterclockwise. Turn tilt/pan handle right or left as desired. Tighten knob to lock in place (Fig. 11). Fig. 11 Pan Locking Knob 4. To switch between landscape and portrait mode, loosen horizontal tilt locking knob by turning counterclockwise. Tilt optic to desired angle. Tighten knob to lock in place (Fig. 12). Fig. 12 REMOVING OPTIC & STORING TRIPOD: 1. While holding optic securely, pull out plate locking lever and lift optic upward to remove from tripod. Unscrew quick release plate from optic and replace plate on tripod (Fig. 13). 2. To put tripod away, loosen tripod center column collar. Fold legs inward and unlock leg locks to retract. Tilt head back so handle is parallel to legs. Secure all locks and place in carryin4gUPbXaJOgH
(:FPiVgS.
51SJ4Q)P.E Fig. 13 Fig. 14 3