Carvin 8000 Instruction Manual - Page 11
Impedance:1M
View all Carvin 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
CARVIN WIRELESS MICROPHONE SPECIFICATIONS Carvin 8000 System Performance Frequency Response: 25-20,000 Hz ±3 dB Dynamic Range: 120 dB (max SPL to A-weighted noise level) Harmonic Distortion: < 0.3% RF Carrier Frequencies: Eight Channels between 170 and 216 MHz Modulation: FM/± 15 KHz Operating Range: 200 feet, adverse conditions; up to 1,500 feet line-of-sight Carvin 8000 Wireless VHF Receivers Controls: Power ON/OFF, Volume Control, Mute Adjust Audio Output: 600 ohm unbalanced Connectors: Audio Output; 1/4" mono phone jack. DC Input; 35 mm mini jack Indicators: Power "ON", and Transmit "ON" LED Mute: Externally adjustable; 1pV preset minimum Image Rejection: 60 dB image and spurious Power Requirements: 12V DC @ 100 mA, tip positive, Power supply provided Carvin 8000GT Wireless Instrument Transmitter Impedance:1M Ohms Connector: 1/4" mono phone jack Controls: Transmitter ON/OFF, Audio ON/OFF, Input Level Adjust Indicator: Low Battery LED RF Power Out: 50 mW (maximum allowed by FCC) Harmonic and Spurious Emissions: Less than -40 dB Battery: 9V alkaline Battery Life: 16-20 hours Carvin 8000LP Wireless Lavalier Transmitter Microphone: High-performance condenser Controls: Transmitter ON/OFF, Audio ON/OFF, Input Level Adjust Indicator: Low Battery LED RF Power Out: 50 mW (maximum allowed by FCC) Harmonic and Spurious Emissions: Less than -40 dB Battery: 9V alkaline Battery Life: 16-20 hours 10