Carvin BELAIR Instruction Manual - Page 4
Replacement Parts List - 50
View all Carvin BELAIR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. IMPORTANT! FOR YOUR PROTECTION, PLEASE READ THE FOLLOWING: WATER AND MOISTURE: Appliance should not be used near water (near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. POWER SOURCES: The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. GROUNDING OR POLARIZATION: Precautions should be taken so that the grounding or polarization means of an appliance is not defeated. POWER CORD PROTECTION: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. SERVICING: The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. FUSING: If your unit is equipped with a fuse receptacle, replace only with the same type fuse. Refer to replacement text on the unit for correct fuse type. SAFETY INSTRUCTIONS (EUROPEAN) The conductors in the AC power cord are colored in accordance with the following code. GREEN & YELLOW-Earth BLUE-Neutral BROWN-Live U.K. MAIN PLUG WARNING: A molded main plug that has been cut off from the cord is unsafe. NEVER UNDER ANY CIRCUMSTANCES SHOULD YOU INSERT A DAMAGED OR CUT MAIN PLUG INTO A POWER SOCKET. LIMITED WARRANTY Your Carvin product is guaranteed against failure for ONE YEAR unless otherwise stated. Vacuum tubes are guaranteed for 90 days. Carvin will service and supply all parts at no charge to the customer providing the unit is under warranty. Shipping costs are the responsibility of the customer. CARVIN DOES NOT PAY FOR PARTS OR SERVICING OTHER THAN OUR OWN. A COPY OF THE ORIGINAL INVOICE IS REQUIRED TO VERIFY YOUR WARRANTY. Carvin assumes no responsibility for horn drivers or speakers damaged by this unit. This warranty does not cover, and no liability is assumed, for damage due to: natural disasters, accidents, abuse, loss of parts, lack of reasonable care, incorrect use, or failure to follow instructions. This warranty is in lieu of all other warranties, expressed or implied. No representative or person is authorized to represent or assume for Carvin any liability in connection with the sale or servicing of Carvin products. CARVIN SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. When RETURNING merchandise to the factory, you may call for a return authorization number. Describe in writing each problem. If your unit is out of warranty, you will be charged the current FLAT RATE for parts and labor to bring your unit up to factory specifications. HELP SECTION 1) AMP WILL NOT TURN ON Check the power to the amp. Check for tripped circuit breakers, unplugged extension cords or powerstrip switches that may be turned off. Check the fuse. If a dark brownish color or no wire can be seen within the glass tube, then replace. The amp may be perfectly fine but occasionally a fuse may blow because of high AC voltage surges. After the fuse has been replaced with the proper Slow Blow value and if the fuse fails again, the amp will require servicing. 2) NO OUTPUT with POWER LIGHT ON Tubes damaged in shipping will be the primary reason for your amp to not function properly. Please give us a call to help guide you through this simple repair. 3) KEEP YOUR AMP LOOKING NEW Use a damp cloth to wipe the controls on the front & rear chassis panels. Wipe the black vinyl covering with a damp cloth. REPLACEMENT PARTS LIST (for circuit cards) CAUTION REFER SERVICING TO QUALIFIED SERVICE PERSONNEL! THIS UNIT CON- RISK OF ELECTRIC SHOCK TAINS HIGH VOLTAGE INSIDE! Ref. # Description B1 Junper, 0.5", 0Ω B2 Junper, 0.35", 0Ω B3 Junper, 0.5", 0Ω B4 Junper, 0.5", 0Ω B5 Junper, 0.5", 0Ω B7 Junper, 0.35", 0Ω B9 Junper, 0.5", 0Ω B10 Junper, 0.5", 0Ω B11 Junper, 0.35", 0Ω B12 Junper, 0.35", 0Ω B13 Junper, 0.35", 0Ω B14 Junper, 0.35", 0Ω B15 Junper, 0.35", 0Ω B16 Junper, 0.8", 0Ω B17 Junper, 0.5", 0Ω B18 Junper, 0.35", 0Ω B19 Junper, 0.5", 0Ω B20 Junper, 0.35", 0Ω B22 Junper, 0.35", 0Ω B23 Junper, 0.8", 0Ω B24 Junper, 0.35", 0Ω B25 Junper, 0.35", 0Ω B26 Junper, 0.35", 0Ω B27 Junper, 0.35", 0Ω B28 Junper, 0.35", 0Ω B29 Junper, 0.5", 0Ω B30 Junper, 0.5", 0Ω B31 Junper, 0.5", 0Ω B32 Junper, 0.8", 0Ω B33 Junper, 0.8", 0Ω B34 Junper, 0.5", 0Ω B35 Junper, 0.35", 0Ω B36 Junper, 0.35", 0Ω B37 Junper, 0.35", 0Ω B50 Junper, 0.5", 0Ω C1 Capacitor, Electrolytic, 10µF 50V, 20% C2 Capacitor, Poly, 0.01µF 100V, 10% C4 Capacitor, Poly, 0.001µF 100V, 10% C5 Capacitor, Poly, 0.033µF 100V, 10% C6 Capacitor, Ceramic, 120PF 500V, 10% C7 Capacitor, Poly, 0.01µF 100V, 10% C8 Capacitor, Electrolytic, 10µF 50V, 20% C9 Capacitor, Mylar, 0.047µF 400V, 10% C10 Not Used C11 Capacitor, Electrolytic, 10µF 50V, 20% C12 Capacitor, Poly, 0.0033µF 100V, 10% C13 Capacitor, Ceramic, 250PF 500V, 5% C14 Capacitor, Ceramic, 560PF 500V, 10% C15 Not Used C16 Capacitor, Ceramic, 0.0047µF 400V, 10% C17 Capacitor, Electrolytic, 10µF 50V, 20% C18 Capacitor, Mylar, 0.047µF 400V, 10% C19 Capacitor, Ceramic, 120PF 500V, 10% C20 Capacitor, Poly, 0.022µF 100V, 10% C21 Capacitor, Poly, 0.0022µF 100V, 10% C22 Capacitor, Poly, 0.0022µF 100V, 10% C23 Not Used C24 Not Used C25 Capacitor, Poly, 0.047µF 100V, 10% C26 Capacitor, Ceramic, 82PF 500V, 5% C27 Capacitor, Electrolytic, 10µF 50V, 20% C28 Capacitor, Mylar, 0.047µF 400V, 10% C29 Capacitor, Poly, 0.0022µF 100V, 10% C30 Capacitor, Electrolytic, 10µF 50V, 20% C31 Capacitor, Poly, 0.0022µF 100V, 10% C32 Not Used C33 Capacitor, Poly, 0.001µF 100V, 10% C34 Capacitor, Ceramic, 56PF 500V, 5% C35 Capacitor, Poly, 0.047µF 100V, 10% C36 Capacitor, Mylar, 0.047µF 400V, 10% C37 Capacitor, Mylar, 0.047µF 400V, 10% Carvin PN 51-00050 50-00035 51-00050 51-00050 51-00050 50-00035 51-00050 51-00050 50-00035 50-00035 50-00035 50-00035 50-00035 44-18000 51-00050 50-00035 51-00050 50-00035 50-00035 44-18000 50-00035 50-00035 50-00035 50-00035 50-00035 51-00050 51-00050 51-00050 44-18000 44-18000 51-00050 50-00035 50-00035 50-00035 51-00050 47-10051 46-10312 46-10212 46-33312 45-12152 46-10312 47-10051 41-47342 47-10051 46-33212 45-25152 45-56152 41-47242 47-10051 41-47342 45-12152 46-22312 46-22212 46-22212 46-47312 45-82052 47-10051 41-47342 46-22212 47-10051 46-22212 46-10212 45-56052 46-47312 41-47342 41-47342 Ref. # Description Carvin PN C38 Capacitor, Electrolytic, 47µF 63V, 20% 47-47061 C39 Capacitor, Mylar, 0.047µF 630V, 10% 46-47362 C40 Capacitor, Electrolytic, 22µF 500V, 20% 42-20052 C41 Capacitor, Electrolytic, 22µF 500V, 20% 42-20052 C42 Capacitor, Electrolytic, 22µF 500V, 20% 42-20052 C43 Capacitor, Electrolytic, 22µF 500V, 20% 42-20052 C44 Capacitor, Electrolytic, 22µF 500V, 20% 42-20052 C45 Capacitor, Electrolytic, 2200uF 6.3V, 20% 47-22260 C46 Capacitor, Electrolytic, 2200uF 6.3V, 20% 47-22260 C47 Capacitor, Electrolytic, 2200uF 6.3V, 20% 47-22260 C48 Capacitor, Mylar, 0.047µF 630V, 10% 46-47362 C49 Not Used C50 Capacitor, Poly, 0.0022µF 100V, 10% 46-22212 C70 Capacitor, Poly, 0.01µF 100V, 10% 46-10312 C71 Capacitor, Ceramic, 180PF 500V, 10% 45-18152 C72 Capacitor, Ceramic, 120PF 500V, 10% 45-12152 D1 Diode, 1N4745A 16V, 1W 60-47450 D2 Diode, 1N4745A 16V, 1W 60-47450 D3 Diode, 1N4745A 16V, 1W 60-47450 D4 Diode, 1N4745A 16V, 1W 60-47450 D5 Diode, 1N4003 200V, 1A 60-40030 D6 Diode, 1N4007A 1000V, 1A 60-10000 D7 Diode, 1N4007A 1000V, 1A 60-10000 D8 Diode, 1N4007A 1000V, 1A 60-10000 D9 Diode, 1N4007A 1000V, 1A 60-10000 D10 Diode, 1N4007A 1000V, 1A 60-10000 D11 Diode, 1N4007A 1000V, 1A 60-10000 D12 Diode, 1N4007A 1000V, 1A 60-10000 D13 Diode, 1N4007A 1000V, 1A 60-10000 D14 Diode, 1N4007A 1000V, 1A 60-10000 D15 Diode, 1N4007A 1000V, 1A 60-10000 D16 Diode, 1N4007A 1000V, 1A 60-10000 D20 Not Used D21 Not Used F1 Fuse Clips, (1 pair) 23-03529 Fuse 1AGC Fast 70-21010 F2 Fuse Clips, (1 pair) 23-03529 Fuse 10A Slow 70-22101 F3 Fuse Clips, (1 pair) 23-03529 Fuse 1AGC Fast 70-21010 G1 Ferrite Bead 15-27430 H1A Cable 10" 2 conductor + Shield 05-00110 H2A Conn. Header, 2 Pin Vert, SHS 23-11002 H2B Conn. Header, 2 Pin Vert, SHS 23-11002 H3A Conn. Header, 4 Pin Vert, SHS 23-11004 H3B Conn. Header, 4 Pin Vert, SHS 23-11004 H5 Wire 10", 18GA (Pair) 04-18010 H6 Wire 4", 18GA (Pair) 04-18040 H7A Conn. Header, 2 Pin Vert, SHS 23-11002 H7B Conn. Header, 2 Pin Vert, SHS 23-11002 H8A Conn. Header, 2 Pin Vert, SHS 23-11002 H8B Conn. Header, 2 Pin Vert, SHS 23-11002 J1 Phone Jack, 1/4, 90° Rev Threaded Neck 21-01804 J2 Phone Jack, 1/4, 3 Pin Plastic, 24mm 21-06453 J3 Phone Jack, 1/4, 3 Pin Plastic, 24mm 21-06453 J4 Phone Jack, 1/4, 3 Pin Plastic, 24mm 21-06453 J5 Phone Jack, 1/4, 7 Pin Plastic Stereo, 24mm 21-06457 L1 Relay 3V PCB MNT, 5V DPDT 70-05303 L2 Relay 3V PCB MNT, 5V DPDT 70-05303 P1 Potentiometer, B100K, O Shaft, 16mm, RX250 90° 71-14052 P2 Potentiometer, B1MEG, O Shaft, 16mm, RX250 90° 71-14070 P3 Potentiometer, 25A25K, O Shaft, 16mm, RX250 90° 71-14050 P4 Potentiometer, B1MEG, O Shaft, 16mm, RX250 90° 71-14070 P5 Potentiometer, 5A500K, O Shaft, 16mm, RX250 90° 71-14060 P6 Potentiometer, B100K, O Shaft, 16mm, RX250 90° 71-14052 P7 Potentiometer, B1MEG, O Shaft, 16mm, RX250 90° 71-14070 P8 Potentiometer, 25A25K, O Shaft, 16mm, RX250 90° 71-14050 P9 Potentiometer, B100K, O Shaft, 16mm, RX250 90° 71-14052 P10 Potentiometer, B100K, O Shaft, 16mm, RX250 90° 71-14052 P11 Potentiometer, Trimmer, 20K PCB MTG 71-22012 P21 Potentiometer, 25A15K-C, O Shaft, 16mm, RX250 90° 71-14048 Ref. # Description QC1 Spade Terminal, QC Vertical, 0.205 QC2 Spade Terminal, QC Vertical, 0.205 QC3 Spade Terminal, QC Vertical, 0.205 QC4 Spade Terminal, QC Vertical, 0.205 QC6A Spade Terminal, QC Vertical, 0.250 QC6B Spade Terminal, QC Vertical, 0.250 QC7 Spade Terminal, QC Vertical, 0.250 QC8 Spade Terminal, QC Vertical, 0.250 QC9 Spade Terminal, QC Vertical, 0.250 QC13A Spade Terminal, QC Vertical, 0.250 QC13B Spade Terminal, QC Vertical, 0.250 QC14 Spade Terminal, QC Vertical, 0.250 QC31 Spade Terminal, QC Vertical, 0.250 QC32 Spade Terminal, QC Vertical, 0.250 QC33 Spade Terminal, QC Vertical, 0.250 QC35 Spade Terminal, QC Vertical, 0.250 QC36 Spade Terminal, QC Vertical, 0.250 QC37 Spade Terminal, QC Vertical, 0.250 R1 Resistor, 100K, .35 Prep., 5% Carbon, 1/4W R2 Resistor, 1.5K, .35 Prep., 5% Carbon, 1/4W R3 Resistor, 220K, .35 Prep., 5% Carbon, 1/4W R4 Resistor, 150K, .35 Prep., 5% Carbon, 1/4W R5 Resistor, 100K, .35 Prep., 5% Carbon, 1/4W R6 Resistor, 1.5K, .35 Prep., 5% Carbon, 1/4W R7 Resistor, 220K, .35 Prep., 5% Carbon, 1/4W R8 Resistor, 1.5K, .35 Prep., 5% Carbon, 1/4W R9 Resistor, 220K, .35 Prep., 5% Carbon, 1/4W R10 Resistor, 4.7K, .35 Prep., 5% Carbon, 1/4W R11 Resistor, 220K, .35 Prep., 5% Carbon, 1/4W R12 Resistor, 47K, .35 Prep., 5% Carbon, 1/4W R13 Resistor, 1K, .35 Prep., 5% Carbon, 1/4W R14 Resistor, 220K, .35 Prep., 5% Carbon, 1/4W R15 Resistor, 47K, .35 Prep., 5% Carbon, 1/4W R16 Resistor, 10K, .35 Prep., 5% Carbon, 1/4W R17 Resistor, 22K, .35 Prep., 5% Carbon, 1/4W R18 Resistor, 100K, .35 Prep., 5% Carbon, 1/4W R19 Resistor, 220Ω, .35 Prep., 5% Carbon, 1/4W R20 Resistor, 2.2M, .35 Prep., 5% Carbon, 1/4W R21 Resistor, 47K, 0.8 Prep., 5% Carbon 1W R22 Resistor, 2.2M, .35 Prep., 5% Carbon, 1/4W R23 Resistor, 220K, .35 Prep., 5% Carbon, 1/4W R24 Resistor, 1.5K, .35 Prep., 5% Carbon, 1/4W R25 Resistor, 220K, .35 Prep., 5% Carbon, 1/4W R26 Resistor, 1M, .35 Prep., 5% Carbon, 1/4W R27 Resistor, 22K, .35 Prep., 5% Carbon, 1/4W R28 Resistor, 1.5K, .35 Prep., 5% Carbon, 1/4W R29 Resistor, 220K, .35 Prep., 5% Carbon, 1/4W R30 Resistor, 100K, .35 Prep., 5% Carbon, 1/4W R31 Resistor, 560Ω, .35 Prep., 5% Carbon, 1/4W R32 Resistor, 100K, .35 Prep., 5% Carbon, 1/4W R33 Resistor, 22K, .35 Prep., 5% Carbon, 1/4W R34 Resistor, 22K, .35 Prep., 5% Carbon, 1/4W R35 Resistor, 100K, .35 Prep., 5% Carbon, 1/4W R36 Resistor, 100K, .35 Prep., 5% Carbon, 1/4W R37 Resistor, 220K, .35 Prep., 5% Carbon, 1/4W R38 Resistor, 220K, .35 Prep., 5% Carbon, 1/4W R39 Resistor, 3.9K, .35 Prep., 5% Carbon, 1/4W R40 Resistor, 100K, .35 Prep., 5% Carbon, 1/4W R41 Resistor, 4.7K, .35 Prep., 5% Carbon, 1/4W R42 Resistor, 2.2K, .35 Prep., 5% Carbon, 1/4W R43 Resistor, 350Ω., SDOF, 10% Sand Bar,10W R44 Resistor, 100Ω, 0.35 Prep., 1% Metal, 1/4W R45 Resistor, 100Ω, 0.35 Prep., 1% Metal, 1/4W R46 Resistor, 10Ω, 0.5 Prep., 5% Carbon, 1/2W R49 Resistor, 100K, .35 Prep., 5% Carbon, 1/4W R50 Resistor, 1MEG, .35 Prep., 5% Carbon, 1/4W R57 Resistor, 4.7K, .35 Prep., 5% Carbon, 1/4W R60 Resistor, 56K, .35 Prep., 5% Carbon, 1/4W R61 Resistor, 56K, .35 Prep., 5% Carbon, 1/4W R62 Resistor, 350Ω, .35 Prep., 5% Carbon, 1/4W R63 Resistor, 350Ω, .35 Prep., 5% Carbon, 1/4W Carvin PN 06-40045 06-40045 06-40045 06-40045 06-40050 06-40050 06-40050 06-40050 06-40050 06-40050 06-40050 06-40050 06-40050 06-40050 06-40050 06-40050 06-40050 06-40050 50-10055 50-15035 50-22055 50-15055 50-10055 50-15035 50-22055 50-15035 50-22055 50-47035 50-22055 50-47045 50-10035 50-22055 50-47045 50-10045 50-22045 50-10055 50-22025 50-22065 53-47045 50-22065 50-22055 50-15035 50-22055 50-10065 50-22045 50-15035 50-22055 50-10055 50-56025 50-10055 50-22045 50-22045 50-10055 50-10055 50-22055 50-22055 50-39035 50-10055 50-47035 50-22035 56-35010 50-10021 50-10021 52-10015 50-10055 50-10065 50-47035 50-56045 50-56045 50-35025 50-35025 Ref. # Description Carvin PN R64 Resistor, 56K, .35 Prep., 5% Carbon, 1/4W R65 Resistor, 56K, .35 Prep., 5% Carbon, 1/4W R66 Resistor, 350Ω, .35 Prep., 5% Carbon, 1/4W R67 Resistor, 350Ω, .35 Prep., 5% Carbon, 1/4W R70 Resistor, 2.2K, .35 Prep., 5% Carbon, 1/4W R71 Resistor, 10K, .35 Prep., 5% Carbon, 1/4W R72 Resistor, 470K, .35 Prep., 5% Carbon, 1/4W R73 Resistor, 22K, .35 Prep., 5% Carbon, 1/4W S1 Switch, DP3T Lift Tall Bat, PCB MTG Switch, Channel Select, SPST toggle, Chassis MTG Switch, Power, LG DPDT, Chassis MTG Switch, Stand-by, LG DPDT, Chassis MTG SPK1 Phone Jack, 1/4, 3 Pin Plastic, 24mm SPK2 Phone Jack, 1/4, 3 Pin Plastic, 24mm Vintage Tube 50, 120V Transformer, Chassis MTG Vintage Tube 50, Output Transformer, Chassis MTG V1 Socket for 12AX7A/EL84 12VAC, 9 Pin, SIN/RUS Vacuum Tube, Type Tube 12AX7A V2 Socket for 12AX7A/EL84 12VAC, 9 Pin, SIN/RUS Vacuum Tube, Type Tube 12AX7A V3 Socket for 12AX7A/EL84 12VAC, 9 Pin, SIN/RUS Vacuum Tube, Type Tube 12AX7A V4 Socket for 12AX7A/EL84 12VAC, 9 Pin, SIN/RUS Vacuum Tube, Type Tube 12AX7A V5 Socket for 12AX7A/EL84 12VAC, 9 Pin, SIN/RUS Vacuum Tube, Type Tube 12AX7A V6 Socket for 12AX7A/EL84 12VAC, 9 Pin, SIN/RUS Vacuum Tube, Type Tube EL84 V7 Socket for 12AX7A/EL84 12VAC, 9 Pin, SIN/RUS Vacuum Tube, Type Tube EL84 V8 Socket for 12AX7A/EL84 12VAC, 9 Pin, SIN/RUS Vacuum Tube, Type Tube EL84 V9 Socket for 12AX7A/EL84 12VAC, 9 Pin, SIN/RUS Vacuum Tube, Type Tube EL84 50-56045 50-56045 50-35035 50-35035 50-22035 50-10035 50-47045 50-22045 25-76286 25-75801 25-31350 25-31350 21-06453 21-06453 15-10640 15-02066 23-91632 65-00127 23-91632 65-00127 23-91632 65-00127 23-91632 65-00127 23-91632 65-00127 23-91632 65-00084 23-91632 65-00084 23-91632 65-00084 23-91632 65-00084