Carvin CX842 Instruction Manual - Page 2

Cx Mixer Specifications, Fuse Selection, Receiving Inspection, For The New Owner - mx842 for sale

Page 2 highlights

CX MIXER SPECIFICATIONS Frequency Response: Total Harmonic Distortion: Equivalent Input Noise: Output Noise: (All Levels Minimum) Output Power: (Power Mixers Only) Maximum Gain: Crosstalk: Common Mode Rejection: Phantom Power: Channel EQ.: Graphic EQ.: Mic Input: Line Input: Power Consumption: Size: Mic or Line Inputs: 20Hz-20KHz ±2dB Less than .025% 150 ohm source: -120dBV -80dBu non-powered mixers -60dBu powered mixers CX1252: 250Watts RMS/side @ 4Ω CX842: 200Watts RMS/side @ 4Ω Mic in two-track main out: 70dB Adjacent ch's: -60db at 1KHz -60db at 1KHz All channels 3 band active, LOW: 100Hz ±12dB MID: 1.5KHz ±12dB HI: 10KHz ±12dB 9 Band Oct. Intervals ±12dB Balanced XLR input: -60 dBu Unbalanced 1/4" Phone Jack -10dBV CX1252: 620VA, CX842: 540VA Box Model: (25lbs) 11"H x 19.5"W x9"D Rack Model: 8.75"H x 19"W x 7.75"D FUSE SELECTION There are two versions of the CX842 and the CX1252. A 120 Volt AC version using the North American three prong plug and a 240 Volt AC version using the European CEE-7 plug. The following chart shows what fuse values to use for each model. Model CX1252 CX1252R CX842 Fuse Selector Chart for 120 VAC Models Fuse Value 6A, 250V, Slow Blow 0.25A, 250V, Slow Blow 6A, 250V, Slow Blow Carvin # 70-22060 70-21002 70-22060 Size 3AG, 1/4 x 1 1/2" (6.35 x 32mm) 3AG, 1/4 x 1 1/2" (6.35 x 32mm) 3AG, 1/4 x 1 1/2" (6.35 x 32mm) Fuse Selector Chart for 240 VAC EXPORT Models Model Fuse Value Carvin # Size CX1252 CX1252R CX842 3A, 250V, Slow Blow 0.125A, 250V, Slow Blow 3A, 250V, Slow Blow 70-22030 70-21001 70-22030 3AG, 1/4 x 1 1/2" (6.35 x 32mm) 3AG, 1/4 x 1 1/2" (6.35 x 32mm) 3AG, 1/4 x 1 1/2" (6.35 x 32mm) 19 RECEIVING INSPECTION INSPECT YOUR CX MIXER FOR ANY DAMAGE which may have occurred during shipping. If any damage is found, notify the shipping company and call CARVIN immediately. SAVE THE CARTON & ALL PACKING MATERIALS. If you have to reship your mixer, always use the original carton and packing material. This will provide the best possible protection for the mixer during shipment. CARVIN and the shipping company are not liable for any damage caused by improper packing. SAVE YOUR INVOICE. It will be required for warranty servicing of your unit. Always check the invoice against the items you have received. SHIPMENT SHORTAGE. If you find some items missing, it may be that they were shipped separately. Please allow several days for the rest of your order to arrive before inquiring. If you determine (after allowing an appropriate amount of time) you have not received all the items you ordered, please call CARVIN. FOR THE NEW OWNER Congratulations on your selection of CARVlN products: "The Professional's Choice." Your new CX series mixer demonstrates CARVIN's commitment to producing the highest quality and most sophisticated engineering in the audio industry today. Its wide acceptance and use by industry professionals illustrates the basis for CARVIN's recognition as "The Professional's Choice." The CX series mixers were designed to be a professional quality mixer in a compacked package. The desire was to pack as many professional features into the smallest package we could, without sacrificing the quality of any one of the features or the mixer. The CX1252 includes a full function 12 channel stereo mixer, two nine band graphic equalizers, a 128 preset digital signal effects processor, and a 500 Watt stereo power amplifier capable of 250 Watts a side into 4 ohms. The CX842 is an 8 channel stereo mixer with a 400 Watt power amplifier. The CX842 has all the features of the CX1252 including the two nine band graphic equalizers and the effects processor. Each CX series mixer is the size of a 5 space rackmount unit surrounded by a 3/4" poplar plywood cabinet covered with Duratuff carpeting making the CX mixer road worthy and ready for a show anywhere. If you would like to comment on any features or the performance of your new mixer, please feel free to contact us. Comments from our customers have helped us to improve and further develop our products and our business. May you enjoy many years of success and fun with your new CARVIN mixer! Carvin's toll free number: 800-854-2235 i

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

19
Frequency Response:
Mic or Line Inputs: 20Hz-20KHz ±2dB
Total Harmonic Distortion:
Less than .025%
Equivalent Input Noise:
150 ohm source: -120dBV
Output Noise:
-80dBu non-powered mixers
(
All Levels Minimum
)
-60dBu powered mixers
Output Power:
CX1252: 250Watts RMS/side @ 4
(
Power Mixers Only
)
CX842:
200Watts RMS/side @ 4
Maximum Gain:
Mic in two-track main out: 70dB
Crosstalk:
Adjacent ch’s: -60db at 1KHz
Common Mode Rejection:
-60db at 1KHz
Phantom Power:
All channels
Channel EQ.:
3 band active,
LOW: 100Hz ±12dB
MID: 1.5KHz ±12dB
HI: 10KHz ±12dB
Graphic EQ.:
9 Band Oct. Intervals ±12dB
Mic Input:
Balanced XLR input: -60 dBu
Line Input:
Unbalanced 1/4” Phone Jack -10dBV
Power Consumption:
CX1252: 620VA, CX842: 540VA
Size:
Box Model: (25lbs) 11”H x 19.5”W x9”D
Rack Model:
8.75”H x 19”W x 7.75”D
CX MIXER SPECIFICATIONS
Fuse Selector Chart for 120 VAC Models
Model
Fuse Value
Carvin #
Size
CX1252
6A, 250V, Slow Blow
70-22060
3AG, 1/4 x 1 1/2” (6.35 x 32mm)
CX1252R
0.25A, 250V, Slow Blow
70-21002
3AG, 1/4 x 1 1/2” (6.35 x 32mm)
CX842
6A, 250V, Slow Blow
70-22060
3AG, 1/4 x 1 1/2” (6.35 x 32mm)
FUSE SELECTION
Fuse Selector Chart for 240 VAC EXPORT Models
Model
Fuse Value
Carvin #
Size
CX1252
3A, 250V, Slow Blow
70-22030
3AG, 1/4 x 1 1/2” (6.35 x 32mm)
CX1252R
0.125A, 250V, Slow Blow
70-21001
3AG, 1/4 x 1 1/2” (6.35 x 32mm)
CX842
3A, 250V, Slow Blow
70-22030
3AG, 1/4 x 1 1/2” (6.35 x 32mm)
There are two versions of the CX842 and the CX1252.
A 120 Volt AC version using
the North American three prong plug and a 240 Volt AC version using the European
CEE-7 plug.
The following chart shows what fuse values to use for each model.
i
INSPECT YOUR CX MIXER FOR ANY DAMAGE which may have occurred
during shipping.
If any damage is found, notify the shipping company and call
CARVIN immediately.
SAVE THE CARTON & ALL PACKING MATERIALS.
If you have to reship
your mixer, always use the original carton and packing material. This will provide
the best possible protection for the mixer during shipment.
CARVIN and the
shipping company are not liable for any damage caused by improper packing.
SAVE YOUR INVOICE.
It will be required for warranty servicing of your unit.
Always check the invoice against the items you have received.
SHIPMENT SHORTAGE.
If you find some items missing, it may be that they
were shipped separately.
Please allow several days for the rest of your order to
arrive before inquiring.
If you determine (after allowing an appropriate amount of
time) you have not received all the items you ordered, please call CARVIN.
Congratulations on your selection of CARVlN products:
“The Professional’s
Choice.”
Your new CX series mixer demonstrates CARVIN’s commitment to
producing the highest quality and most sophisticated engineering in the audio
industry today.
Its wide acceptance and use by industry professionals illustrates
the basis for CARVIN’s recognition as “The Professional’s Choice.”
The CX series mixers were designed to be a professional quality mixer in a com-
packed package.
The desire was to pack as many professional features into the
smallest package we could, without sacrificing the quality of any one of the fea-
tures or the mixer.
The CX1252 includes a full function 12 channel stereo mixer,
two nine band graphic equalizers, a 128 preset digital signal effects processor,
and a 500 Watt stereo power amplifier capable of 250 Watts a side into 4 ohms.
The CX842 is an 8 channel stereo mixer with a 400 Watt power amplifier.
The
CX842 has all the features of the CX1252 including the two nine band graphic
equalizers and the effects processor.
Each CX series mixer is the size of a 5
space rackmount unit surrounded by a 3/4” poplar plywood cabinet covered with
Duratuff carpeting making the CX mixer road worthy and ready for a show any-
where.
If you would like to comment on any features or the performance of your new
mixer, please feel free to contact us.
Comments from our customers have
helped us to improve and further develop our products and our business.
May you enjoy many years of success and fun with your new CARVIN mixer!
Carvin’s toll free number: 800-854-2235
RECEIVING INSPECTION
FOR THE NEW OWNER