Carvin TRX3118A TRx3118A Product Manual - Page 1

3000 TRx3118A / NFA "NF" (No Flyware) SERIES Flyable Active 18-inch Subwoofer Features ♦ 2500W X-Drive™DSP active module ♦ Faital Pro™ 18-inch driver ♦ SureFly™ rigging hangs with TRx3210 and TRx3210A ♦ Russian Baltic Birch ♦ 16-Gauge steel, acoustic foam backed grill ♦ Black Duratec™ weather resistant finish The TRx3118A offers X-Drive™ DSP processing, a 1500W sub amp plus a 1000W amp for external speakers in a low profile bass reflex enclosure designed for hanging. The SureFly™ SF3118 rigging is matched to the TRx3210 for flying or ground stacking. The TRx3118A also features three pole mount cups, rubber foot pads, foot receivers and recessed handles. Applications include: ♦ Subwoofers for installed Line Array systems ♦ Large subwoofer array hangs ♦ Outdoor events Flown here with two TRx3210's powered by each TRx3118A TRX3118NFA Specifications TRx3118A / NFA Description The TRx3118A is our finest, most powerful 18-inch flyable active subwoofer system featuring power for external cabinets. The high power Faital Pro™ 18-inch woofer features a 4-inch voice coil with 9.75mm of linear excursion and low temperature high peak power capacity. The enclosure is constructed of CNC machined 13-Ply Premium Russian Baltic Birch with a steel powder coated front grill. Four deep, corner located ports produce a very strong structure and coherent sub frequency output. The added strength and rigidity of the corner ports increases the efficiency of the speaker's output into the room, not wasting energy on vibrating the cabinet's walls. The result is coherent sub frequency output vertically and horizontally with ideal low frequency coupling in multi box hangs. The box is designed with the SF3118 SureFly™ rigging to be flown independently or with TRx3210A's. The TRx3210A's can be flown underneath, ground stacked on top in an arc with rigging for bleacher stand coverage, or ground stacked without hardware. Three top pole mounts enable suspending two TRx3210 speakers with the matching dual pole system, stacking two TRx3903's or suspending a TRx2115 or TRx12N with the centered pole mount. The amp module features XDrive™ DSP processing and bullet-proof DCM power amp technology using FR4 double sided circuit boards in a fan ventilated, internally sealed aluminum structure for solid construction and durability. The optional DB3118 dolly board latches to the front of the cabinet for easy transport and grill protection. System Type: Active 2500W X-Drive processed 18-inch Sub, bass-reflex, with external Amp Output Freq. Response: 32 Hz - 1.5 kHz (-10dB) 38 Hz - 1 kHz (-3dB) Bass Enhance mode: 15Hz < normal Coverage Pattern: Omni - Cardioid in 8x arrays Crossover: Active DSP: by preset, or 58-160 Hz @24dB/oct. Power: 3200W 2 cycle pulse peak 2500W 20ms burst (1500W sub/1000W external) 1875W RMS (1250W sub/625W ext. @4ohms) Input Sensitivity: 1.0, 1.2, 1.4, or 2.0 Vrms settings Maximum Input signal: +12dBu Maximum SPL: 133dB peak Driver: Faital Pro™ 18-inch, 4-inch voice coil Enclosure: 13-Ply Russian Baltic Birch Suspension/Mounting: 20 captive 3/8in-16 nut fly pts. SureFly™ SF3118 rigging 3x 1-3/8 pole mount cup Foot receivers for TRx3210 and TRx3118A Finish: Black DuraTec™ Transport: 2 Recessed handles Grill: Black powder coated steel Acoustically transparent foam backing Connectors: Signal In/Thru: XLR female/XLR male Remote Level/Mute: Terminal block External Speaker Output: 4 pin twist-lock AC IN/OUT: Locking Neutrik™ PowerCon™ AC Power Req'd: TRx3118A: 120VAC 50/60Hz 600VA TRx3118A-E: 230VAC 50/60Hz 600VA Dimensions: 20 in x 23.5 in x 29 in 508 mm x 597 mm x 737 mm Net Wt: 88 lb (40 kg) Rigging Accessories: DB3118 front latching dolly board SF3118 SureFly™ rigging kit SureFlyTBar™ T-bar kit TCSHK58 5/8" Shackle Origin: USA 12340 WORLD TRADE DRIVE SAN DIEGO, CA USA 92128 CARVINAUDIO.COM (USA) CARVINWORLD.COM