Carvin TRX3210A TRx3210A manual - Page 11
Step 5, Step 6, Pin Storage
View all Carvin TRX3210A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Pin Storage The quick-release pins can be stored in the handles on the inside of the SureFly hardware plates on each side of the array module. This keeps them from being misplaced or damaged during transport and holds the inner adjustment plate from swinging down. Step 5 Remove the lower quick-release pin from the handle storage location to release the adjustment plate. Allow the adjustment plate to swing down between the two side plates on the lower enclosure. Adjust enclosures to allow adjustment plate to capture the lower enclosure with hook on adjustment plate. When the adjustment plate is fully in place, the "A" location pin can be inserted. Repeat on opposite side of array enclosure. close up view Adjustment plate swing s down Attach to motor hoist Attach to motor hoist GROUND GROUND Adjustment plate hook captures lower enclosure GROUND Step 6 Push the second quick-release pin into forward hole labeled (A 0˚) on the upper enclosure. Repeat on opposite side of array enclosure. This 0 degree position is used for a straight Line-Array. This is also storage and transport position when using the DB3210 dolly board. 11