Carvin UH6000 Instruction Manual - Page 4
Introduction, Specifications
View all Carvin UH6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
INTRODUCTION Thank you for purchasing a Carvin UHF Diversity Wireless Microphone System and congratulations on your choice. The UH6000 is the best performance and price value available in rackmount UHF wireless systems and is loaded with features: • Clear channel operation on the wide open, uncluttered UHF band for interference-free performance in any application or locale. • Carvin's companding circuitry for an industry best 120dB Dynamic Range, and the clearest, most natural sound available. • Tone Squelch™ for locking out potential interference. • Choice of transmitters: • Bodypack with unique 3-way switch for selecting input type: instrument (guitar, bass, etc.), headmic™ headworn mic, or lavalier mic. • Handheld microphone with a powerful neodymium cartridge that delivers unsurpassed audio, minimal handling noise and enhanced feedback rejection. • UH6000 receiver with DigiTRU Diversity™ for maximum range and dropout protection, full LED indicators, both 1/4" unbalanced and XLR balanced outputs, and special circuitry for noiseless transmitter ON/OFF switching. 4 SPECIFICATIONS UH6000 RECEIVER Frequency Response 50 Hz - 15 KHz, +/- 3 dB Dynamic Range 120 dB Total Harmonic Distortion < 0.6% RF Carrier Frequency Range UHF, choice of single frequencies from 794-820 MHz Frequency Stability +/- 0.005% crystal controlled Modulation FM (F3E), +/- 20 KHz Operating Range Up to 250 feet typical (depending on site conditions)-up to 500+ feet lineof-sight Reception Mode DigiTRU Diversity™ (Dual Antenna) Squelch Tone Key (32.768 KHz), External Control Controls Power ON/OFF, Volume Control, Level Low/Hi Switch, Squelch (Mute) Adjust Connectors DC in, 1/4" (6.3 mm) unbalanced phone jack (750 mV/5K Ohm), XLR balanced output (60 mV/600 Ohm), A & B BNC antenna jacks, fuse LED Indicators Power ON, Diversity A/B, RF LEVEL and AF LEVEL (5 segment) displays Unwanted Signal Rejection 60dB image and spurious Power Requirements DC 12-15V @ 300 mA, AC/DC adapter included Dimensions 16" x 6.5" x 1.73" (40.6 x 16.5 x 4.4 cm) Fuse 20mm glass type, 250V, 500mA Weight 3.93 lb (1.8 Kg) TRANSMITTERS Audio Inputs Bodypack: 3.5mm locking mini-jack 3-way select switch for inputs: instrument, headworn mic, or lavalier mic Handheld Mic: Integral neodymium dynamic cartridge Controls Bodypack: OFF/STANDBY/ON, INSTRUMENT/HEADWORN MIC/LAV MIC, INPUT LEVEL Handheld Mic: OFF/STANDBY/ON LED Indicator Unit "ON" (single flash), Low Battery Alert (steady) RF Power Out 50mW nominal (maximum allowed by FCC) Harmonic & Spurious Emissions < -50 dB Battery 9V Alkaline Battery Life 8-10 Hours (35mA draw typical) Dimensions Bodypack: 4.2" x 2.5"x .88" (10.7 x 6.4 x 2.2 cm) Handheld Mic: 9.5"x 1.37" (24.1 x 3.48cm) Weight Bodypack: 3 oz (84g) Handheld Mic: 7.5 oz (210g) Specifications subject to change for product improvement purposes 13