Casio CTK3000 User Guide - Page 15

English Turning off power clears sampled data! Turning off power will cause any sampled sound data on the keyboard to be deleted. ■ How sampled sounds are played Pressing Middle C (C4) will play back the original sound. The keys to the left and right of C4 play the sound at different pitches. C4 Starting a Sampling Operation Manually 1. Press 3 a number of times until "SmplAuto" appears on the display (page E-4). Smp l Au t o 2. Press bn (10-key) [-] key to select the OFF setting. This enables manual sampling. When this setting is selected, sampling will not start until you press 4. • When the above setting is "oFF", sampling starts when you release 4, not when you press it. Sampling will not start if you keep 4 depressed. Controlling the Keyboard Sounds Applying Effects to a Sampled Sound You can apply various effects to the sample sound stored at tone number 401. 1. Use bn (10-key) to select a tone number from 402 to 411. Tone numbers 402 to 411 actually represent effects assigned to tone number 401. Selecting a tone will play the sampled sound in a loop, along with the applicable effect, as described below. Effect Name 402 Loop 1 403 Loop 2 404 Loop 3 405 Pitch 1 406 Pitch 2 407 Pitch 3 408 Tremolo 409 Funny 1 410 Funny 2 411 Funny 3 Description Loops the sampled sound. Loops the sample sound and raises the pitch of the resonating sound when the keyboard key is released. Loops the sample sound and lowers the pitch of the resonating sound when the keyboard key is released. Changes the pitch from low to high, at an increasing rate. Changes pitch from high to low, at a decreasing rate. Changes pitch from high to low, at a decreasing rate, and then raises the pitch when the key is released. Alternates volume between high and low. Adds vibrato and changes pitch by a gradually increasing amount. Alternates between high pitch and low pitch. Adds vibrato and changes pitch from low to high. E-13