Casio CW-L300 User Guide - Page 57
Part 6 - Configuring the Printer Setup
UPC - 079767168582
View all Casio CW-L300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Part 6 - Configuring the Printer Setup The printer has a SET UP screen that you can use to configure a variety of basic settings. ■ To configure the printer setup 1. Press to turn on the printer. 2. Press FUNCTION and then SET UP. 3. Use and to select the SET UP item whose setting you want to change, and then press SET. 4. Use the cursor keys to change it. When this setting is selected: DEFAULT FONT INPUT CONTRAST DENSITY SOUND LANGUAGE cm/inch DEMO PRINT Change its setting like this: • Use and to select the font (page 51). • Use and to select INSERT or OVERWRITE (page 44). • Use and to adjust the display contrast. • Use and Mode. • Use and to select DISC Mode or TAPE to adjust the print density setting. • Use and or off. to turn printer sound effect on • Use and to select the display language you want to use. • Use and to select centimeters (cm) or inches as the unit of measurement. • Use and to select DISC Mode or TAPE Mode, and then press SET to start demo printing. Demo Printing Demo printing uses built-in data to demonstrate the type of disc printing and tape label printing that can be performed by the printer. Important! • If there is label data from your last label layout session is still in memory, performing a demo print will delete it. If you think you will need the data later, save it in memory (page 54) before performing a demo print. ■ To perform disc demo printing 1. Make sure an ink ribbon cassette is loaded in the printer. • See page 11 of the Startup Guide for information about loading ink ribbon cassettes. 2. If the printer is on, press to turn it off. 3. Press to turn on the printer. 4. Press FUNCTION and then SET UP. 5. Use and to select DEMO PRINT, and then press SET. 6. Use and to select DISC, and then press SET. 7. Use and SET. to select the demo data you want to print, and then press 8. Use and to select PRINT, and then press SET. 9. Use and to select DISC, and then press SET. • If you want to print a disc case label, select TAPE instead • If you want to print a disc case label, see page 13 of the Startup Guide for information about loading tape cartridges. 55 E