Casio EX-FS10BE Owners Manual - Page 59

NOTE • The higher the frame rate (speed), the more lighting is required when shooting. When shooting a high speed movie, shoot in a well-lit environment. • When recording certain types of movies, the image that appears on the monitor screen may be smaller than normal. When recording a high speed movie, there are black bands along the top, bottom, left, and right of the screen. • When recording a high speed movie, light source flicker can cause horizontal bands to appear in the image. This does not indicate malfunction of the camera. • During high speed movie recording, Auto Focus and exposure remain fixed at the levels they were when you initially started recording. Zoom and monitor screen content switching are all disabled. • To focus the image, half-press the shutter button for Auto Focus or focus manually before starting the high speed movie recording operation. Using Prerecord Movie (Prerecord (Movie)) With this feature, the camera pre-records up to five seconds of whatever is happening in front of the lens in a buffer that is continually updated. Pressing [0] saves the pre-recorded action (buffer contents) followed by real-time recording. Real-time recording continues until you stop it. Prerecord Movie can be used when shooting a standard (STD) movie, a high-definition (HD) movie, or a high speed (HS) movie. • When using Prerecord Movie in combination with high speed movie, the buffer will store two seconds of pre-recording instead of the usual five. [0] [0] Movie Real-time recording start 5-second prerecorded part (from the buffer) * Approximately two seconds for high speed movie Real-time recording end 59 Recording Movies