Casio WK-3300 User Guide - Page 100
Problem, Possible Cause, Action, See
View all Casio WK-3300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Troubleshooting Problem The key or tuning does not match when playing along with another MIDI machine. Parts suddenly drop out during song memory playback. Some parts do not play at all during song memory playback. Nothing happens when the LAYER or SPLIT button is pressed. No sound is produced when playing MIDI data from a computer. Playing on the keyboard produces an unnatural sound when connected to a computer. Cannot record chord accompaniment data on a computer. Possible Cause 1. The tuning or transpose parameter is set to a value other than 00. 2. Mixer coarse tune, fine tune, and/ or octave shift settings are values other than 00. The number of tones being played at the same time exceeds the keyboard's limitation. 1. Channels are turned off. 2. Volume setting is too low. 1. One or more of the melody channels (2 through 4) is turned off. 2. The volume setting of one or more of the melody channels (2 through 4) is too low. 3. The keyboard is in record standby. 4. The SMF Player Mode is currently being use. 1. USB cable is not connected properly. 2. Channel is turned off, or volume setting is too low. The computer's MIDI Thru function is turned on. Accomp/Song MIDI Out is turned off. Action 1. Change the transpose or tuning parameter value to 00. 2. Use the Mixer to change the coarse tune, fine tune, and/or octave shift settings to 00. Use the Mixer to turn unneeded channels off and decrease the number of parts being played. 1. Use the Mixer to turn channels on. 2. Use the Mixer to check the volume setting. 1. Use the Mixer to turn on Channels 2 through 4. 2. Use the Mixer to raise the volume setting of Channels 2 through 4. 3. The LAYER and SPLIT buttons are disabled during recording and record standby. 4. Turn off the SMF Player Mode. LAYER and SPLIT are not available while the SMF Player Mode is in use. 1. Connect USB cable properly. 2. Use the Mixer to turn the channel on, or raise the volume setting. Turn off the MIDI Thru function on the computer or turn off Local Control on the keyboard. Turn on Accomp/Song MIDI Out. See page E-69, 70 E-42 E-40 E-40 E-41 E-40 E-41 E-66, 67 E-75 E-81 E-40, 41 E-74 E-74 The keyboard starts up abnormally when it is turned on. 1. Flash memory is corrupted. There is something wrong with the card. 2. The keyboard detected abnormal flash memory data and is automatically resetting the keyboard system. 1. a. Remove the batteries from the keyboard and disconnect the AC adaptor and press the POWER button. b. Reload the batteries and/or reconnect the AC adaptor, and then press the POWER button again to turn on power. c. Use the TRANSPOSE/ FUNCTION button to perform the system reset operation. • If this does not solve the problem, contact your nearest authorized CASIO Service Provider to request repair. 2. Wait (about 40 seconds) until the "Pls Wait" message disappears from the display. E-14, 15 E-74 E-98