Casio WK3800 Instruction Manual - Page 9
Channel Message
View all Casio WK3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
4 Different Operations Depending on Part Mode Each Part Mode (see 12.1 "About the Part Mode"), which is the sound source operational mode, has different messages for performing operations upon receipt. Each message is explained in the applicable message sections of this document. Part II Channel Message 5 Receive Channel The channel number of Channel messages received by each part is in accordance with each part's receive channel setting, which is configured on this Model. Turning off the setting disabled Channel message receipt for that part. The MIDI Channel of messages that can change DSP settings is determined by the Global Channel, which is described under "10.7 MIDI Channel Number". 6 Send Channel Basically, the MIDI Channel of the Channel message that is sent when play data or parameter setting is changed is the value that corresponds to the part that is playing or the parameter that was changed. When the performance part or part for which the parameter setting is changed is Part 1, however, the value depends on the Transpose/ Function Keyboard Channel value. The MIDI Channel of the message that is sent when the DSP setting is changed depends on the Global Channel, which is described under "10.7 MIDI Channel Number". 7 Note Off Format Message Format: 9nH kkH 00H 8nH kkH **H (Receive only) n: MIDI Channel Number kk: Key Number **: Ignored Send Sent when something is played on the keyboard. Receive Received over MIDI Channels that correspond to each part. Any part whose mixer channel is turned off is not received. The velocity value is ignored. 9