Casio XJ-A245U User Manual - Page 39
After checking the POWER/STANDBY indicator, disconnect the power
View all Casio XJ-A245U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Indicator/Error Message POWER : Amber flashing Red steady TEMP : Red steady LAMP : - Message : - POWER : Amber flashing Red steady TEMP : Red flashing (0.5-second interval) LAMP : Red flashing (0.5-second interval) Message : - POWER : Amber flashing Red steady TEMP : Red flashing (2-second interval) LAMP : Not lit or red flashing Message : - POWER : Amber flashing Red steady TEMP : Amber flashing (1-second interval) LAMP : - Message : - Description and Required Action The projector was turned off automatically due to some problem that was probably caused by external digital noise or some other reason. Confirm that the POWER/STANDBY indicator is lit red (without flashing). After checking the POWER/STANDBY indicator, disconnect the power cord from the projector and wait for all of the projector's indicators to go out. Next, reconnect the power cord and turn projector power back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. The projector was turned off automatically because the lamp turned off or did not turn on. After confirming that the POWER/STANDBY indicator is lit red (without flashing), unplug the power cord. Wait for a short while and then plug it back in and turn on the projector again. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. Power has turned off automatically due to a projector memory error. Confirm that the POWER/STANDBY indicator is lit red (without flashing). After checking the POWER/STANDBY indicator, disconnect the power cord from the projector and wait for all of the projector's indicators to go out. Next, reconnect the power cord and turn projector power back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. Power has turned off automatically because the lamp cover is open. Perform the following steps. After confirming that the POWER/STANDBY indicator is lit red (without flashing), disconnect the power cord from the projector. Check to make sure that the lamp cover is closed. Plug the power cord back in and turn the projector back on again. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. 39