Home » Casio Manuals » Projectors » Casio XJ-M245 » Manual Viewer

Casio XJ-M245 Function Guide - Page 30

Configuring Wireless Settings

Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Configuring Wireless Settings You can use the projector's setup menu to configure the Wireless function settings described below. Setting Name Description Change wireless connection Switches the projector's SSID setting from one of the six default SSIDs to another. Wireless info Displays the projector's current SSID, login code, and other information. Initialize Network Settings Returns all network settings to their initial factory defaults. Note More advanced projector wireless LAN connection settings (connection setup, security settings, etc.) can be configured using the System Admin page, which can be accessed from the computer currently connected to the projector via wireless LAN. For more information, see "System Admin Page Operations and Settings" (page 33). To switch between default SSIDs Important! This procedure can be used only to change from one default SSID to another default SSID. If the current SSID or the SSID being changed to is not one of the six default SSIDs, use the projector's System Admin page to change the SSID. For details, see "To configure projector's network settings and wireless LAN connection settings" (page 35). 1. While the Wireless screen is being projected, press the [MENU] key. 2. Use the [T] key to move the highlighting to "USB" and then press the [ENTER] key. B 30

Section	Page
Contents	2
About This Manual...	5
Terms and Conventions	5
What the Wireless Function Lets You Do...	6
Projector Requirements	8
Installing Wireless Connection 3	9
Minimum System Requirements	9
Installing Wireless Connection 3	10
Installing Wireless Connection 3 on a Second and Subsequent Computers	10
Connecting the Wireless Adapter	11
Establishing a Wireless LAN Connection between the Projector and a Computer	12
Wireless LAN Connection and Projection Operation Flow	12
About the Projector’s Wireless Application	13
To perform wireless projection	13
Wireless Standby Screen	13
Wireless Connection 3	14
To start up Wireless Connection 3	14
Wireless Connection 3 Windows	14
To display Wireless Connection 3 help	15
To display Wireless Connection 3 version information	15
To close Wireless Connection 3	15
Using a Default SSID to Connect a Computer to the Projector via Wireless LAN	15
To use a default SSID to connect a computer to the projector via wireless LAN	15
Establishing a Wireless LAN Connection from Multiple Computers	17
Configuring Security Settings for a Wireless LAN Connection	18
Security Setting Flow	18
Configuring Security Settings	19
To log in to the projector’s System Admin page	19
To log out of the projector’s System Admin page	20
To configure security settings	21
Establishing a Wireless LAN Connection after Configuring Security Settings	23
To establish a wireless LAN connection between the projector and a computer after configuring security settings	23
Establishing a Wireless LAN Connection with a Second and Subsequent Computers after Configuring Security Settings	24
Establishing a Wireless LAN Connection while Security is Turned Off	24
Wireless LAN Connection Operations	25
Image Projection Operations	25
Starting and Stopping Projection from a Computer Connected via Wireless LAN Connection	26
Displaying the User Name on the Projection Screen	28
Other Operations	28
Re-establishing a Wireless LAN Connection	28
Projector Information	28
Selecting display speed priority or resolution priority for projection	28
Terminating a Wireless LAN Connection	29
Initializing Wireless Connection 3	29
Configuring Wireless Settings	30
System Admin Page Operations and Settings	33
System Admin Page Operations	33
Configuring Settings	33
Initializing All System Admin Page Settings	36
Control Panel	36
System Admin Page Settings	37
System Admin > Setup Settings	37
System Admin > Change Password	38
Appendix	39
Using the Token Wizard	39
Installing Wireless Connection 3 on USB Memory	39
To use a USB token to connect a computer to the projector via wireless LAN	40
Projecting from a Terminal with MobiShow Installed	41
Confirmed MobiShow Platforms	42
Wireless LAN Connection Troubleshooting	43
Wireless LAN Connection between the Projector and a Computer	43
Simultaneous Wireless LAN Connections with Multiple Projectors	44
System Admin Page	45
Performing Wireless Operations from a Computer	45
Error Messages	46
Wireless Connection 3 Error Messages	46

Match case Limit results 1 per page

Configuring Wireless Settings

You can use the projector’s setup menu to configure the Wireless function settings described below.

Note

More advanced projector wireless LAN connection settings (connection setup, security settings,

etc.) can be configured using the System Admin page, which can be accessed from the

computer currently connected to the projector via wireless LAN. For more information, see

“System Admin Page Operations and Settings” (page 33).

To switch between default SSIDs

Important!

This procedure can be used only to change from one default SSID to another default SSID. If the

current SSID or the SSID being changed to is not one of the six default SSIDs, use the

projector’s System Admin page to change the SSID. For details, see “To configure projector’s

network settings and wireless LAN connection settings” (page 35).

While the Wireless screen is being projected, press the [MENU] key.

Use the [

] key to move the highlighting to “USB” and then press the [ENTER]

key.

Setting Name

Description

Change wireless connection

Switches the projector’s SSID setting from one of the six default SSIDs to another.

Wireless info

Displays the projector’s current SSID, login code, and other information.

Initialize Network Settings

Returns all network settings to their initial factory defaults.