Casio XJ-S32 Owners Manual - Page 20

Setting Name Input Noise Filter RCV Restore Menu Defaults RCVU Setting Unit Source Specific Source Specific Description This setting is valid when VIDEO is selected as the input source. Normal*: Select this setting when projecting a movie. High: Select this setting when projecting still images. In particular, this setting should be used when projecting still images from a digital camera connected to the projector's VIDEO terminal. Use this sub-menu to return all of the sub-menu items on the Image Adjustment 1 main menu to their initial default settings. z Restoring menu defaults when there is no input signal will restore defaults for the currently selected input source. Image Adjustment 2 Main Menu Setting Name Input Setting Unit Description Vertical Position RCV Signal Specific Use this sub-menu to adjust the vertical position of the input source image within the projection area. Horizontal Position RCV Signal Specific Use this sub-menu to adjust the horizontal position of the input source image within the projection area. Frequency R Signal Specific When vertical bands appear in the projected image while RGB is selected as the input source, it means that the frequency setting is not correct. When this happens, use this setting to adjust the frequency manually. Phase Important! If, for some reason, your manual frequency settings cause the image input from the computer to disappear from the projection, you can press the [AUTO] key to perform an auto adjust operation, which should cause the image to appear. R Signal When there is flickering in the projected image while RGB Specific is selected as the input source, it means that the phase setting is not correct. When this happens, use this setting to adjust the phase manually. 20