Casio XJ-S35 Owners Manual - Page 31

Connecting to a Component Video Output Device Some video devices are equipped with a component video output terminal. You can use an optionally available component video cable (YK-3) to connect the RGB input terminal of the projector to the component video output terminal of a video device. Important! Always turn off the projector and the video device before connecting them. Projector RGB input terminal Optional component video cable (YK-3) To component video output terminal Video device z Component video output terminals come in 3-terminal sets: Y·Cb·Cr or Y·Pb·Pr. Be sure to match the colors of the plugs on the optional YK-3 component video cable with the colors of the terminals (Green: Y; Blue: Cb/Pb; Red: Cr/Pr). z You can use the optional YK-3 component video cable to connect to pin jack (RCA) type component video output terminals. The projector does not support connection to any other type of terminal. z Note that connection only to an analog component video output terminal is supported. Connection to a digital output terminal is not supported. 31