Celestron CGE Pro 1400 FASTAR Computerized Telescope CGE Pro Info Sheet - Page 2

Specifications - 11089

Page 2 highlights

CGE™ Pro Series CGE Pro moUnT 4 PoinT ClUTCh SySTEm inCrEASEd PAyloAd CAPACiTy 9 Pin ThrEAd-on moTor CAblES In addition to being fully computerized with a database of over 40,000 celestial objects, the CGE Pro German Equatorial mount has been completely redesigned to offer numerous design advantages. ACCuRACy The hallmark of any telescope mount is its ability to find, center and track celestial objects with the highest degree of accuracy. FINDING A STAR With standard hand control alignment, CGE Pro has the ability to center a star in your eyepiece or ccd chip to within 5 arc minutes. using NexStar's advanced pointing features such as Calibration Stars, Sync and Precise GoTo, further improves the pointing accuracy to as low as 1 arc minute in the desired region of the sky. TRACkING A STAR With larger .75" pitch diameter worm, precision made cut-steel gears in gearboxes, and seven slot skewed armature motors the CGE Pro delivers typical tracking performance of +/-9 arc seconds, which can be further reduced with the mounts permanent periodic error correction (PPEC). INCREASED PAylOAD CAPACITy Able to hold the 14" telescope more securely as well as larger optical tubes with a maximum payload of 90lbs. All-STAR POlAR AlIGNMENT Choose any bright alignment star for a software assisted alignment of the mounts polar axis that will have you ready for imaging even if you can't see the North Star. NO-TOOl POlAR AlIGNMENT larger hand knobs for both Altitude and Azimuth adjustments. MERIDIAN TRACkING Extended tracking past the Meridian of up to 20 degrees of uninterrupted imaging through the best part of the sky. FASTER SlEW SPEED Improved gearing and motors provide faster slew speeds than ever before with a maximum slew rate of over 5°/per second. POWER MANAGEMENT Redesigned electronics deliver constant regulated power to the motors capable of driving the telescope even when not perfectly balanced. This allows the CGE Pro to have the payload capacity of that of much larger (and expensive) mounts without sacrificing smooth tracking motion and pointing accuracy across the entire sky. Specifications MoDEl CGE Pro 925 CGE Pro 1100 CGE Pro 1400 CGE Pro 1400 Fastar ItEM# 11086 11087 11088 11089 Focal lENGtH 2350 mm f/10 2800 mm f/10 3910 mm f/11 3910 mm f/11 FINDER EYEpIEcES ScopE 25 mm - 1.25" (94x) 6x30 40 mm - 1.25" (70x) 9x50 40 mm - 1.25" (98x) 9x50 40 mm - 1.25" (98x) 9x50 optIcal coatING Starbright XlT Starbright XlT Starbright XlT optIcal DESIGN optIcal tUBE 9.25" Schmidt-Cassegrain Aluminum 11" Schmidt-Cassegrain Aluminum 14" Schmidt-Cassegrain Aluminum tElEScopE WEIGHt 176 lbs 204 lbs 243 lbs Starbright XlT 14" Schmidt-Cassegrain Aluminum 243 lbs For complete specifications and product information, visit: www.celestron.com Product design and specifications are subject to change without prior notification. 2835 Columbia Street n Torrance, CA 90503 U.S.A. Tel: 310.328.9560 n www.celestron.com

  • 1
  • 2

2835 Columbia Street
n
Torrance, CA 90503 U.S.A.
Tel: 310.328.9560
n
www.celestron.com
CGE PRO MOUNT
INCREASEd PAyLOAd
CAPACITy
9 PIN ThREAd-ON
MOTOR CABLES
4 POINT CLUTCh SySTEM
In addition to being fully computerized with a database of over
40,000 celestial objects, the CGE Pro German Equatorial mount
has been completely redesigned to offer numerous design
advantages.
ACCURACY
The hallmark of any telescope mount is its ability to find, center
and track celestial objects with the highest degree of accuracy.
FINDING A STAR
With standard hand control alignment, CGE Pro has the ability
to center a star in your eyepiece or ccd chip to within 5 arc
minutes. Using NexStar’s advanced pointing features such as
Calibration Stars, Sync and Precise GoTo, further improves the
pointing accuracy to as low as 1 arc minute in the desired region
of the sky.
TRACKING A STAR
With larger .75” pitch diameter worm, precision made cut-steel
gears in gearboxes, and seven slot skewed armature motors
the CGE Pro delivers typical tracking performance of +/-9 arc
seconds, which can be further reduced with the mounts permanent
periodic error correction (PPEC).
INCREASED PAYLOAD CAPACITY
Able to hold the 14” telescope more securely as well as larger
optical tubes with a maximum payload of 90lbs.
ALL-STAR POLAR ALIGNMENT
Choose any bright alignment star for a software assisted alignment
of the mounts polar axis that will have you ready for imaging even
if you can’t see the North Star.
NO-TOOL POLAR ALIGNMENT
Larger hand knobs for both Altitude and Azimuth adjustments.
MERIDIAN TRACKING
Extended tracking past the Meridian of up to 20 degrees of
uninterrupted imaging through the best part of the sky.
FASTER SLEW SPEED
Improved gearing and motors provide faster slew speeds than
ever before with a maximum slew rate of over 5°/per second.
POWER MANAGEMENT
Redesigned electronics deliver constant regulated power to the
motors capable of driving the telescope even when not perfectly
balanced. This allows the CGE Pro to have the payload capacity
of that of much larger (and expensive) mounts without sacrificing
smooth tracking motion and pointing accuracy across the
entire sky.
Product design and specifications are subject to change without prior notification.
CGE
Pro Series
Specifications
For complete specifications and product information, visit: www.celestron.com
FOCAL
FINDER
OPTICAL
OPTICAL
OPTICAL TELESCOPE
MODEL
ITEM#
LENGTH
EYEPIECES
SCOPE
COATING
DESIGN
TUBE
WEIGHT
CGE Pro 925
11086
2350 mm f/10
25 mm – 1.25” (94x)
6x30
Starbright XLT
9.25” Schmidt-Cassegrain
Aluminum
176 lbs
CGE Pro 1100
11087
2800 mm f/10
40 mm – 1.25” (70x)
9x50
Starbright XLT
11” Schmidt-Cassegrain
Aluminum
204 lbs
CGE Pro 1400
11088
3910 mm f/11
40 mm – 1.25” (98x)
9x50
Starbright XLT
14” Schmidt-Cassegrain
Aluminum
243 lbs
CGE Pro 1400
Fastar
11089
3910 mm f/11
40 mm – 1.25” (98x)
9x50
Starbright XLT
14” Schmidt-Cassegrain
Aluminum
243 lbs