Celestron COSMOS 5 MP LCD Desktop Digital Microscope Instruction Manual - Page 5
Setup
View all Celestron COSMOS 5 MP LCD Desktop Digital Microscope manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
3. SETUP INSTALL BATTERY Open the Battery Compartment and insert the Lithium battery, making sure to align the connection points correctly. NOTE: A lthough the battery has a partial charge, if you are going to use the microscope with the battery only, be sure to charge the battery first. Refer to section 3.E below for more details on charging the battery INSERT MICRO SD CARD To capture images with your microscope while NOT connected to a computer, you need to insert a MicroSD card. NOTE: The MicroSD card is NOT included. To capture images without a MicroSD card, see section 5.E in this manual for instructions on installing the computer software and using it to save images to your computer. Locate the MicroSD card slot (2) on the side of the LCD housing. Slide the card into the slot until it clicks into place and latches. Be sure not to force the card into the slot, as this may damage the card or the slot. NOTE: The MicroSD card should be formatted before use. See section 6.2.G for details on formatting the card. POWER ON Press the POWER button to turn the unit on. Press POWER button again to turn the unit off. NOTE: The Microcsope has a Power Save feature. Refer to section 6.2.C for details. Power button ENGLISH 5