Celestron NexStar 6SE Computerized Telescope NexStar 6 SE and 8 SE Manual - Page 21

example, if your telescope is pointed at the brightest star in the constellation Lyra, choosing Identify and then searching the Named Star catalog will no doubt return the star Vega as the star you are observing. However, by selecting Identify and searching by the Named Object or Messier catalogs, the hand control will let you know that the Ring Nebula (M57) is approximately 6° from your current position. Searching the Double Star catalog will reveal that Epsilon Lyrae is only 1° away from Vega. To use the Identify feature: • Press the Menu button and select the Identify option. • Use the Up/Down scroll keys to select the catalog that you would like to search. • Press ENTER to begin the search. Note: Some of the databases contain thousands of objects, and can therefore take a minute or two to return the closest object. Precise GoTo The NexStar has a precise goto function that can assist in finding extremely faint objects and centering objects closer to the center of the field of view for high power viewing or astrophotography. Precise Goto automatically searches out the closest bright star to the desired object and asks the user to carefully center it in the eyepiece. The hand control then calculates the small difference between its goto position and its centered position. Using this offset, the telescope will then slew to the desired object with enhanced accuracy. To use Precise Goto: MENU 1. Press the MENU button and use the Up/Down keys to select Precise Goto. • Choose Database to select the object that you want to observe from any of the database catalogs listed • Choose RA/DEC to enter a set of celestial coordinates that you wish to slew to. 2. Once the desired object is selected, the hand control will search out and display the closest bright star to your desired object. Press ENTER to slew to the bright alignment star. 3. Use the direction buttons to carefully center the alignment star in the eyepiece. Press ENTER to slew to the desired object. SCOPE SETUP SETUP TIME-SITE ANTI-BACKLAS H AZM POSITIVE AZM NEGATIVE ALT POSITIVE ALT NEGATIVE SLEW LIMITS SLEW ALT MAX SLEW ALT MIN FILTER LIMITS Scope Setup Features Setup Time-Site - Allows the user to customize the NexStar display by changing time and location parameters (such as time zone and daylight savings). Anti-backlash - All mechanical gears have a certain amount of backlash or play between the gears. This play is evident by how long it takes for a star to move in the eyepiece when the hand control arrow buttons are pressed (especially when changing directions). The NexStar's anti-backlash feature allows the user to compensate for backlash by inputting a value which quickly rewinds the motors just enough to eliminate the play between gears. The amount of compensation needed depends on the slewing rate selected; the slower the slewing rate the longer it will take for the star to appear to move in the eyepiece. Therefore, the anti-backlash compensation will have to be set higher. You will need to experiment with different values; a value between 20 and 50 is usually best for most visual observing, whereas a higher value may be necessary for photographic guiding. Positive backlash compensation is applied when the mount changes its direction of movement from backwards to forwards. Similarly, negative backlash compensation is applied when the mount changes its direction of movement from forwards to backwards. When tracking is enabled, the mount will be moving in one or both axes in either the positive or negative direction, so backlash compensation will always be applied when a direction button is released and the direction moved is opposite to the direction of travel. To set the anti-backlash value, scroll down to the anti-backlash option and press ENTER. Enter a value from 0-99 for both azimuth and altitude directions and press ENTER after each one to save these values. NexStar will remember these values and use them each time it is turned on until they are changed. ALTMAX IN LIST ALTMIN IN LIST DIRECTION BUTTONS GOTO APPROACH AZM APPROACH ALT APPROACH AUTOGUIDE RATES RA RATE DEC RATE CORDWRAP UTILITIES GPS ON/OFF LIGHT CONTROL KEYPAD DISPLAY FACTORY SETTING PRESS UNDO PRESS "0" VERSION GET AXIS POSITION GOTO AXIS POSITION HIBERNATE SUN MENU SCROLLING MENU CALIBRATE GOTO SET MOUNT POSITION WEDGE ALIGN 21