Celestron NexStar 6SE Computerized Telescope Quick Setup Guide for NexStar 6 S - Page 1
Celestron NexStar 6SE Computerized Telescope Manual
View all Celestron NexStar 6SE Computerized Telescope manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
NexStar 6SE, 8SE Item # 11068 1 Item # 11069 2 Quick Set-up Guide 3 Your NexStar 6SE or 8SE includes:fork arm with optical tube; tripod; accessory tray; bubble level; computerized hand control; one 25mm eyepiece;StarPointer finderscope; Star diagonal; owner's manual, The Sky® CD,NexRemote Telescope Control CD,RS-232 cable. 4 Assemble tripod by spreading the legs out until fully extended. 5 Extend tripod legs 6 to 8 inches by loosening the tripod leg locking knob and pulling the leg to desired length and re-tightening knob. 6 To attach accessory tray, remove threaded Slide accessory tray onto rod. Replace nut and washer from accessory tray rod. threaded nut.Tighten to secure. 7 8 Tripod legs should be the same length to provide a level platform for the telescope.A bubble level is included to assist in leveling. 9 Once tripod is level, put away the bubble level. Grab scope by the fork arm and line up holes on bottom of telescope with the screws on the tripod mounting platform. Tighten three screws under tripod mounting platform to secure the fork arm to the tripod. Hand control comes mounted in the fork arm. Hand control should fit snugly in fork arm as shown above.