Celestron NexStar 8SE Computerized Telescope Quick Setup Guide for NexStar 6 S - Page 2
Quick Set-up Guide [cont]
View all Celestron NexStar 8SE Computerized Telescope manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Quick Set-up Guide [cont] 10 11 12 Slide StarPointer finderscope onto mounting platform as shown above. Tighten screws located on side of StarPointer to secure. 13 Insert silver barrel of diagonal into the visual back as shown above. Tighten silver screw to secure. Tighten silver screw on the diagonal to secure in place. 14 15 Insert silver barrel of 25mm eyepiece into the diagonal as shown above. Tighten silver screw (inset) to secure. To power up telescope, you will first need to insert batteries. Remove battery cover on fork arm base as shown above. Place AA batteries (user supplied) inside the battery compartment located at the base of the fork arm and replace battery cover. 16 17 18 Before you begin viewing, please remember to remove tube lens cap. While observing, tube should be positioned as shown above. Focus Knob In order to get the best view through the telescope, slowly turn the focus knob until the objects are in sharp focus. Before you can begin observing, you must setup your hand control, align your finderscope and align your telescope. Step by step instructions are included in the following Hand Control Setup action.