Celestron Portable LCD Digital Microscope 44310 LCD Handheld Microscope Manual - Page 4

Specifications

Get Celestron Portable LCD Digital Microscope PDF manuals and user guides View all Celestron Portable LCD Digital Microscope manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

Specifications LCD Screen Sensor Resolution / Interpolation Optical Power (Magnification) Illumination Digital Zoom Internal Storage SD Cards Supported Field of View USB Cable Image Format Power Requirements Weight / Dimensions Operating Temperature 2.4 inch /60 mm TFT 320 x 240 resolution 3MP CMOS Sensor 2048x1536 / digital up to 12MP 1 to 3.7x and 54x with digital zoom up to 216x 6 White LEDs 4x 128MB Flash Memory (3MP - est. 250 Snapshots & 5min. Video) Up to 16GB 26 mm @ 2x, 14 mm @ 3.7x, 2.5 mm @ 54x 2.0 Snapshots: JPG - Video: AVI 2AA Batteries (user supplied) 0.75W 6.6 oz (187 g) / 3.8" x 2.5" x 4.2" (96 x 63 x 107mm) 0°C to 40°C (32° F to 104° F) Getting Started Battery Installation To use your microscope install 2AA batteries which provides the power to operate it indoors or outdoors. Slide the battery cover on the bottom of the microscope (5) to open, and insert the batteries according to the battery polarity as shown. After the batteries are installed, close the battery cover. Battery condition will be shown in the top left of the LCD in viewing and video modes, and "Low Battery Condition" will be shown in red on the screen to notify you. Note: When not using the microscope, you will want to turn it off to preserve battery life. Typical battery life is 1.5 hours using 3 LEDs and 0.75 hours using all 6 LEDs. For most applications, 3 LEDs are all that are needed for proper illumination. Also, if the microscope will not be used for a few weeks or more, remove the batteries. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
4
S
PECIFICATIONS
LCD Screen
2.4 inch /60 mm TFT
320 x 240 resolution
Sensor Resolution /
Interpolation
3MP CMOS Sensor 2048x1536 /
digital up to 12MP
Optical Power
(Magnification)
1 to 3.7x and 54x with
digital zoom up to 216x
Illumination
6 White LEDs
Digital Zoom
4x
Internal Storage
128MB Flash Memory
(3MP – est. 250 Snapshots & 5min. Video)
SD Cards Supported
Up to 16GB
Field of View
26 mm @ 2x, 14 mm @ 3.7x, 2.5 mm @ 54x
USB Cable
2.0
Image Format
Snapshots: JPG — Video: AVI
Power Requirements
2AA Batteries (user supplied) 0.75W
Weight / Dimensions
6.6 oz (187 g) /
3.8” x 2.5” x 4.2“ (96 x 63 x 107mm)
Operating Temperature
0°C to 40°C (32° F to 104° F)
G
ETTING
S
TARTED
B
ATTERY
I
NSTALLATION
To use your microscope install 2AA batteries which provides the power to operate it
indoors or outdoors. Slide the battery cover on the bottom of the microscope (5) to
open, and insert the batteries according to the battery polarity as shown. After the
batteries are installed, close the battery cover. Battery condition will be shown in
the top left of the LCD in viewing and video modes, and “Low Battery Condition”
will be shown in red on the screen to notify you.
Note: When not using the microscope, you will want to turn it off to
preserve battery life. Typical battery life is 1.5 hours using 3 LEDs and 0.75
hours using all 6 LEDs. For most applications, 3 LEDs are all that are needed
for proper illumination.
Also, if the microscope will not be used for a few weeks or more, remove the batteries.