Chamberlain D2101 Installation Manual - English - Page 6
Tools Needed, Additional Items You May Need
View all Chamberlain D2101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Preparation Tools Needed 5/32 3/16 5/16 1/2 1/4 7/16 9/16 Additional Items You May Need: Survey your garage are a to see if you will need any of the following items: l (2)2X4 Pieces of wood : May beused to fasten the header bracket to the structural supports. Also used to position the garage door opener during installation and for testing the safety reversing sensors. l Support bracket and fastening hardware: Must beused if you have a finished ceiling in your garage. Support Brackets Hardware x2 (each) l Extension brackets (Model 041A5281-1) or wood blocks: Depending upon garage construction, extension brackets or wood blocks may be needed to install the safety reversing sensor. Lag screws x4 Lag screws x12 Extension Brackets - 041A5281-1 Wood Blocks l Fastening hardware: Alternate floor mounting of the safety reversing sensor will require hardware not provided. 7/16 l Doorre inforcement: Required if you have alight weight steel, aluminum, fiber glass or glass panel door. l Rail extension kit: Required if your garage door is more than 7 feet (2.13 m) high. 6