Chamberlain MC100 MC100 Owners Manual - Page 2
Getting Started - universal
View all Chamberlain MC100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
GETTING STARTED The Universal Mini Remote Control can be programmed to activate up to two products, such as a garage door opener, MyQ® light controls, gate operator, or commercial door operator. Each button on the remote control works independently of the other and must be programmed separately. The images throughout this manual are for reference only and your product may look different. Garage Door Opener Gate Operator Commercial Door Operator Top Button LED Bottom Button Key Ring Holder You will need to locate the Program/LEARN button on your product before you start programming. GARAGE DOOR OPENERS The Program/LEARN button is typically located on the back or side panel of your garage door opener. Newer garage door openers may have a Program/Learn button located on the door control. Your Program/LEARN button may have a different name (SMART button, SET button, etc.). For help locating your Program/LEARN button refer to the Table of Contents in this manual or contact your garage door opener manufacturer. COMMERCIAL DOOR OPERATORS The Program/LEARN button is typically located on the logic board of your operator. Your Program/LEARN button may have a different name (RADIO button, XMITTER button, etc.). For help locating your Program/ LEARN button contact your door operator manufacturer. GATE OPERATORS The Program/LEARN button is typically located on the control board of your operator. Your Program/LEARN button may have a different name (RADIO button, XMITTER button, etc.). For help locating your Program/ LEARN button contact your gate operator manufacturer. 2 EXTERNAL RECEIVER Some products do not have a Program/LEARN button. In this case, the Program/LEARN button will be located in an external receiver. The receiver will be located on the product or mounted nearby. Follow the programming instructions for an external receiver.