Chamberlain MYQ-G0402MC Quick Start Guide - English French Spanish - Page 1

® SMART GARAGE™ CONTROL All versions of: MYQ-G0401 QUICK START GUIDE WHAT'S IN THE BOX Screws for Door Sensor Mounting Plate Warning Amber Green Blue Light LED LED LED Door Sensor Red Test LED Button Warning Placard WARNING Child can be pinned under automatic garage door. Death or serious injury can result. • Never let child walk or run under moving door. • Never let child use door opener controls. • Always keep moving door in sight. • This opener system is equipped with an unattended operation feature. The door could move unexpectedly. • If person is pinned, push control button or use emergency release. • Test door opener monthly: Refer to your owner's manual. Place one-inch object (or 2x4 laid at) on oor. If door fails to reverse on contact, adjust opener. If opener still fails to reverse door, repair or replace opener. 114A1719-1 Do not remove or paint over this label Mount wall control out of child's reach (at least 5 feet above oor). Place next to wall control. . Copyright 2008 Anchors and Screws for Hub Hub Hook and Loop Adhesive Strips Settings Door Button Door for Door Sensor Sensor Sensor Button 1 Button 2 Power Adapter Screws for Door Sensor BEFORE YOU START Read all warnings and instructions below thoroughly BEFORE beginning. You will need: • Access to your compatible garage door opener. • A 2.4 GHz router with a strong Wi-Fi® signal inside your garage. • Your Wi-Fi password. • Your mobile device connected to your Wi-Fi network (not cellular). • Bluetooth® enabled on your mobile device. • A drill with 5/32" bit, screwdriver and ladder (optional). LET'S GET SET UP Download the myQ App • On your mobile device, follow the in-app instructions to set up the Smart Garage Control. WHEN YOU ARE SET UP Attach the Warning Placard • Attach the warning placard to the wall next to the door control. PRODUCT SUPPORT Manual Use camera on your mobile device to scan QR code below for product manual. ADDITIONAL INFORMATION Control Two Garage Doors • Monitor, open and close a second garage door with an additional garage door sensor (SKU: MYQ-G0402, sold separately). Warning Placard Door Control Chamberlain.com/smart-garage-control/manual Replacement Parts 041-0106....Smart Garage Control Power Supply MYQ-G0402......Chamberlain Door Sensor K010A0056........Door Sensor 3V Battery, CR2450 To reduce the risk of SEVERE INJURY to persons: • DO NOT enable the Chamberlain Smart Garage Control if operating either one-piece or swinging doors. Enable this device with sectional doors ONLY. If using the Smart Garage Control with residential door openers, the Control must be used only with door openers manufactured after 1993 that use photoelectric sensors located near the bottom of the door track that do not change the state of those photoelectric sensors to a low power mode. WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov One Year Limited Warranty The Chamberlain Group LLC warrants to the first consumer purchaser of this product that it is free from defect in materials and/or workmanship for a period of 1 year from the date of purchase. Software Agreement Product and the software contained herein are copyrighted. Your opening and use constitutes acceptance of, and is subject to, License Agreement and Terms of Use available at www.myq.com/agreement NOTICE: This device complies with Part 15 of the FCC rules and Industry Canada's license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device must be installed to ensure a minimum 20 cm (8 in.) distance is maintained between users/bystanders and device. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules and Industry Canada ICES standard. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.