Chamberlain MYQ-SGC1WCH myQ Smart Garage Camera MYQ-SGC1WCH Installation Guide - Page 1
Chamberlain MYQ-SGC1WCH Manual
View all Chamberlain MYQ-SGC1WCH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
MYQ-SGC1WCH What's In the Box Micro USB Cable Reset Button Power Adapter Smart Garage Camera™ Installation Guide LED Camera Lens Ambient Light Sensor Microphone USB Input Mounting Screws Magnet Mounting Base Drywall Anchor 1. Connect Your Smart Garage Camera™ Use the myQ® App, your mobile device, and your router to control your Smart Garage Camera™. Before You Start: 1. Be sure your mobile device's Wi-Fi® is on and displays a strong signal where the camera will sit. 2. Check that Bluetooth is enabled on your mobile device. 3. Enable Location Services on your mobile device. 4. Download the myQ® App. TIP: If you already have the myQ® App, confirm you have the latest version to optimize your myQ® experience. 5. Create or sign in to your account. 6. Add your Smart Garage Camera™ to your myQ® account. 2. Preparation Check Your View Before You Mount: l Power up the Smart Garage Camera™ in your chosen mounting area. l Smart Garage Camera™ is in reach of the included 10' (3 m) Micro-USB cable and a power outlet. l Hold the camera at your chosen mounting area, free from visual and metal obstructions. Check your mobile device view shows what you want to see before you mount. l If using the magnetic mounting base screws for a surface mount, mark the surface area to install. l Power off the Smart Garage Camera™ by unplugging it to begin a surface mount. See the Smart Garage Camera™ installation video. WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov 3. Mount the Smart Garage Camera™ For Indoor Use Only Items You May Need: l Ladder l Philips Screw Driver l Drill and Drill Bit l Hammer Choose from Options A or B: Option A: Magnetically Set to Garage Door Opener 1. Place the Smart Garage Camera™ magnetic mounting base on the garage door opener, with lens facing what you want 2. to see. Wrap the cable around the Smart Garage mounting base. Camera™ Option B: Surface Mount 1. Remove the magnetic mounting base from the Smart Garage Camera™. 2. Position the magnetic mounting base at the desired installation surface. 3. Insert screws provided with drywall anchors, as needed. 4. Reassemble the Smart Garage Camera™ over the magnetic mounting base. 5. Position the Smart Garage Camera™ with lens facing what you want to see. 4. Connect Power 1. Power your Smart Garage Camera™ with the included micro-USB power adapter and cable. The LED lights solid white. After approximately 40 seconds, the LED flashes blue, blue-green, then solid green. You are now connected. 2. From the myQ® App, tap your camera and the live video displays. 3. Adjust the Smart Garage Camera™, twisting the posable camera head to change the viewing angle.