Cisco 1131AG Hardware Installation Guide - Page 77
No Cisco IOS image file., Low Power Condition for Lightweight Access, Points
UPC - 882658058141
View all Cisco 1131AG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Chapter 4 Troubleshooting Lightweight Access Points Checking the Lightweight Access Point LEDs Table 4-1 LED Signals (continued) Cable Bay Area Top of Unit Message type Ethernet LED Radio LED Status LED Meaning Boot loader errors Red Red Red DRAM memory test failure. Off Red Blinking red Flash file system failure. and blue Off Amber Blinking red Environment variable (ENVAR) failure. and blue-green Amber Off Blinking red Bad MAC address. and yellow Red Off Blinking red Ethernet failure during image recovery. and off Amber Amber Blinking red Boot environment error. and off Red Amber Blinking red No Cisco IOS image file. and off Amber Amber Blinking red Boot failure. and off Cisco IOS errors Blinking - - amber Transmit or receive Ethernet errors. - Blinking - Maximum retries or buffer full occurred on the radio. amber Red Red Amber Software failure; try disconnecting and reconnecting unit power. - - Amber General warning, insufficient inline power (see the "Low Power Condition for Lightweight Access Points" section). Controller status - - Alternating Connecting to the controller. green, red , and amber1 Note If the access point remains in this mode for more than five minutes, the access point is unable to find the controller. Ensure a DHCP server is available or that controller information is configured on the access point. - - Blinking Loading the access point image file. dark blue 1. This status indication has the highest priority and overrides other status indications. OL-8369-05 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide 4-5