Cisco 1751V Hardware Installation Guide - Page 21
Connector/Slot, Label/Color, Description, Supports either a Cisco WIC or VIC. For detailed - ios
UPC - 746320568683
View all Cisco 1751V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 1 Cisco 1751 Router Overview Rear-Panel Ports and LEDs Table 1-2 Rear-Panel Connectors Connector/Slot Ethernet port Label/Color 10/100-Mbps ETHERNET (yellow) Auxiliary port Console port WIC/VIC slot AUX (black) CONSOLE (light blue) SLOT 0 WIC/VIC slot SLOT 1 VIC slot Power socket Protective earth SLOT 2 +5, +12, -12 VDC Ground wire Description Router connection to the local Ethernet network. This port autosenses the speed (10 or 100 Mbps) and duplex mode (full or half) of the device to which it is connected and then operates at the same speed and in the same duplex mode. Modem connection for remote configuration using Cisco IOS software. Terminal or PC connection for local configuration using Cisco IOS software. Supports either a Cisco WIC or VIC. For detailed information, refer to the Cisco WAN Interface Cards Hardware Installation Guide that comes with every card. Supports either a Cisco WIC or VIC. For detailed information, refer to the Cisco WAN Interface Cards Hardware Installation Guide that comes with every card. Supports one Cisco VIC. For detailed information, refer to the Cisco WAN Interface Cards Hardware Installation Guide that comes with every card. Router connection to the external power supply. Router connection to earth ground by using a green and yellow 14 AWG ground wire. Use the rear-panel LEDs (see Table 1-3) during router installation to confirm that you have correctly connected all cables to the router. 78-11258-04 Cisco 1751 Router Hardware Installation Guide 1-5