Cisco 2950C-24 Hardware Installation Guide - Page 40
Bandwidth Utilization on Catalyst 2950-24, 2950C-24, and 2950T-24 Switches - 2950g 24
UPC - 746320454481
View all Cisco 2950C-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Front-Panel Description Chapter 1 Overview Figure 1-21 Bandwidth Utilization on Catalyst 2950-24, 2950C-24, 2950SX-24, and 2950T-24 Switches SYST RPS STAT UTIL DUPLX SPEED MODE 1x 2x 3x 4x 5x 6x 7x 8x 10Base-T / 100Base-TX 9x 10x 11x 12x 13x 14x 15x 16x Catalyst 2950 SERIES 17x 18x 19x 20x 21x 22x 23x 24x 100Base-FX 25x 26x 74725 0-0.0487%+ 6.25-12.4%+ 12.5-24%+ 25-49%+ 50%+ If all LEDs on a Catalyst 2950G-12-EI switch are green (no amber showing), the switch is using 50 percent or more of the total bandwidth. If the LED for GBIC module slot 2 is off, the switch is using more than 25 but less than 50 percent of the total bandwidth. If LEDs for both GBIC module slots are off, the switch is using less than 25 percent of the total bandwidth, and so on. (See Figure 1-22.) 65397 Figure 1-22 Bandwidth Utilization on Catalyst 2950G-12-EI Switches SYST RPS STAT UTIL DUPLX SPEED MODE 12 1X 34 56 78 9 10 11 12 11X 2X 12X < 25% + 25% - 49% + 50% + Catalyst 2950 1 2 If all LEDs on a Catalyst 2950G-24-EI or 2950G-24-EI-DC switch are green (no amber showing), the switch is using 50 percent or more of the total bandwidth. If the LED for GBIC module slot 2 is off, the switch is using more than 25 but less than 50 percent of the total bandwidth. If LEDs for both GBIC module slots are off, the switch is using less than 25 percent of the total bandwidth, and so on. (See Figure 1-23.) Figure 1-23 Bandwidth Utilization on Catalyst 2950G-24-EI and 2950G-24-EI-DC Switches 65396 12 34 56 78 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1X SYST RPS 11X 13X 15X 1 STAT UTIL DUPLX SPEED 2X 12X 14X 16X MODE < 25% + 25% - 49% + 50% + Catalyst 2950 2 If all LEDs on a Catalyst 2950G-48-EI, 2950SX-48-SI, or 2950T-48-SI switch are green, the switch is using 50 percent or more of the total bandwidth. If the LED for GBIC module slot 2 is off, the switch is using more than 25 but less than 50 percent of the total bandwidth. If LEDs for both GBIC module slots are off, the switch is using less than 25 percent of the total bandwidth, and so on. (See Figure 1-24.) 1-20 Catalyst 2950 Switch Hardware Installation Guide OL-6156-01